I have an mTDI AFN with a Bosch VE pump from a 2.9 Kia Sedona. I'm looking for a specific pump bracket to run this set up and wondered if anyone had a VW parts list to help source one in a breakers.
The part number is 028130147M. Specifically need this one as its only one we can find that has 68mm hole and the idler pulley we need.
Thanks,
Simon
Help identifying mount console for Injection Pump
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 7
- Joined: 18 Jun 2018, 14:23
- 80-90 Mem No: 0
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Help identifying mount console for Injection Pump
Passat B5 1997-2000 AHH engine 1.9 TDi, not a very common engine I think
available new from classic parts for euro300
available new from classic parts for euro300
-
- Registered user
- Posts: 7
- Joined: 18 Jun 2018, 14:23
- 80-90 Mem No: 0
Re: Help identifying mount console for Injection Pump
Amazing thanks Aidan. Hadn't even heard of the AHH variant.
Simon
Simon
- ZsZ
- Registered user
- Posts: 1412
- Joined: 12 Feb 2009, 16:28
- 80-90 Mem No: 14899
- Location: Budapest, Hungary
- Contact:
Re: Help identifying mount console for Injection Pump
AHH was put in ones with automatic trans AFAIK.
BTW there is one on ebay:
https://www.ebay.co.uk/itm/223548364699
BTW there is one on ebay:
https://www.ebay.co.uk/itm/223548364699
Zoltan
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
1986 Multivan ex-Caravelle. Van since 2006, running mTDi 1Z since 2008 with Fiat Croma 1.9 TDid pump 2008-2019, custom pump since 2019
5spd custom box 4.57 diff + 0.74 5th
- Aidan
- Trader
- Posts: 6557
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
Re: Help identifying mount console for Injection Pump
suffix B is for the rest of the 1.9s of that era AHU, AFN, AVG
AHH was fitted to autos and 5 speed manuals, it's VNT but 90hp, maybe it was a clean variant for certain markets rather than the more common AFN 110hp
AHH was fitted to autos and 5 speed manuals, it's VNT but 90hp, maybe it was a clean variant for certain markets rather than the more common AFN 110hp
-
- Registered user
- Posts: 7
- Joined: 18 Jun 2018, 14:23
- 80-90 Mem No: 0
Re: Help identifying mount console for Injection Pump
For some reason the M variant with the essential 68mm hole is significantly more expensive!