So I'm feeling pretty stupid but in my defence the installation instructions for this expensive fridge are almost non-existent.
I know you have to prise out the little plastic caps from the inside of the fridge and screw self tappers through the wall of the fridge into the adjoining cabinetry.
But does the self tapper (A) simply lap against the plastic and then go through the metal wall of the fridge or (B) do you have to use a larger bit and remove the plastic entirely so the self tapper laps right up against the inside metal edge of the fridge?
I realise this description is a bit complicated so here's a pic of what I mean. And if it just laps up against the plastic doesn't that make the install a bit fragile?
I'm probably over thinking this. Thanks for any advice!
Installing CRX50 fridge - where do the screws go?
Moderators: User administrators, Moderators
- sweetaswesty
- Registered user
- Posts: 150
- Joined: 24 Jun 2013, 12:47
- 80-90 Mem No: 12543
- Location: Herts
Installing CRX50 fridge - where do the screws go?
1991 Westfalia California Hightop1.9tdi
- sweetaswesty
- Registered user
- Posts: 150
- Joined: 24 Jun 2013, 12:47
- 80-90 Mem No: 12543
- Location: Herts
Re: Installing CRX50 fridge - where do the screws go?
I’ve found an answer. The first option (A) is the correct one in case any one else is interested!
1991 Westfalia California Hightop1.9tdi
-
- Registered user
- Posts: 566
- Joined: 20 Nov 2011, 19:07
- 80-90 Mem No: 10519
- Location: Bagshot, Surrey
Re: Installing CRX50 fridge - where do the screws go?
Option A is what I did so nice to hear that is correct !!
It's a cracking fridge by the way - enjoy!
(Just need to keep those solar panels working to keep it chugging along)
It's a cracking fridge by the way - enjoy!
(Just need to keep those solar panels working to keep it chugging along)
1987 Westfalia Van, Petrol 2.0 AGG