I wasn't sure whether to post this under body or electrical so apologies if I made the wrong choice.
I'm refitting the dash and there are these thick foam gaskets that are sandwiched between the dash and the two heater blower outlets that exit directly out of the top of the dash and I'm wondering whether they should be (a) taped/ glued/ fitted to the dash or (b) to the heater blower outlets before I refit the dash.
Any thoughts or advice? I'm planning to fix them to the heater blower outlets with double sided tape unless someone knows a better way?
Thanks!
This is what they look like and where they go:
Refitting dash - blower outlet foam gaskets
Moderators: User administrators, Moderators
- sweetaswesty
- Registered user
- Posts: 150
- Joined: 24 Jun 2013, 12:47
- 80-90 Mem No: 12543
- Location: Herts
Refitting dash - blower outlet foam gaskets
1991 Westfalia California Hightop1.9tdi
-
- Registered user
- Posts: 1911
- Joined: 10 Aug 2019, 23:30
- 80-90 Mem No: 17004
- Location: Coventry
Re: Refitting dash - blower outlet foam gaskets
Double sided tape is what I used. Should be fine at that once the dash is back on.
1985 LeisureDrive 2.1DJ 5 Speed syncro conversion project.
1979 LT 2.0CH Westy project
1979 LT 2.0CH Westy project
- sweetaswesty
- Registered user
- Posts: 150
- Joined: 24 Jun 2013, 12:47
- 80-90 Mem No: 12543
- Location: Herts
Re: Refitting dash - blower outlet foam gaskets
Thanks that's great!
1991 Westfalia California Hightop1.9tdi