I have gotten my grubby mitts on a Westfalia interior. I'm in the process if re upholstering the rear bench as it was in a bit of a sorry state, however in parallel I am looking at fitting the structure of the rear bench. There are various mount points, both on the floor and also the rear in front of the engine access. I have checked and unfortunately none of those mount points exist so my question is what is the best way to create mount points in the various places?
Thanks in advance!
Retro fitting a Westy interior
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 278
- Joined: 16 Jun 2011, 09:51
- 80-90 Mem No: 9818
- Location: Lothersdale
Re: Retro fitting a Westy interior
Im wanting the same information
1986 Syncro EJ251, 2007 T5 4-Motion, Active Snowtrac, Golf Mk2 Syncro
-
- Trader
- Posts: 2597
- Joined: 27 May 2009, 18:56
- 80-90 Mem No: 16628
- Location: hayling island
Re: Retro fitting a Westy interior
They are additional mounting points westfalia, specific, assume is LHD ? I’m breaking a Westy so could cut the mountings out and measure their locations
-
- Registered user
- Posts: 278
- Joined: 16 Jun 2011, 09:51
- 80-90 Mem No: 9818
- Location: Lothersdale
Re: Retro fitting a Westy interior
Measurements and pictures of where the mounts are would be good
1986 Syncro EJ251, 2007 T5 4-Motion, Active Snowtrac, Golf Mk2 Syncro
Re: Retro fitting a Westy interior
That would be great. Its a rhd but a twin slider.
- irishkeet
- Trader
- Posts: 2986
- Joined: 30 Nov 2005, 13:26
- 80-90 Mem No: 2322
- Location: Cotton | Suffolk
Re: Retro fitting a Westy interior
bmouthrob wrote:I have gotten my grubby mitts on a Westfalia interior. I'm in the process if re upholstering the rear bench as it was in a bit of a sorry state, however in parallel I am looking at fitting the structure of the rear bench. There are various mount points, both on the floor and also the rear in front of the engine access. I have checked and unfortunately none of those mount points exist so my question is what is the best way to create mount points in the various places?
Thanks in advance!
Hi bmouthrob
Where are you based? Im sure I have 1 mount left from when I fitted the westy interior in my syncro, I have no measurements but there is a lot of pics on my thread that may help you....http://forum.club8090.co.uk/viewtopic.php?f=4&t=141925
With the mount you can easily make up some others, drop me a PM
cheers
irishkeet
------------------------
1985 Doka 1.9 DG 4 Speed Box
---
1986 Fakefalia Syncro Subaru EJ25
1985 Doka 1.9 DG 4 Speed Box
---
1986 Fakefalia Syncro Subaru EJ25
Re: Retro fitting a Westy interior
Hello i also need all this weld on captive nuts brackets. Any for sale. Frode
- irishkeet
- Trader
- Posts: 2986
- Joined: 30 Nov 2005, 13:26
- 80-90 Mem No: 2322
- Location: Cotton | Suffolk
Re: Retro fitting a Westy interior
Drop me a PM mate
------------------------
1985 Doka 1.9 DG 4 Speed Box
---
1986 Fakefalia Syncro Subaru EJ25
1985 Doka 1.9 DG 4 Speed Box
---
1986 Fakefalia Syncro Subaru EJ25