Hi all
First post here! Looking forward to getting out in our 1983 air cooled T25.
I've got an issue with my horn. It's not the brass ring that usually goes that's the problem, but the copper contact that sits underneath this ring. Anyone know where you can buy this bit? If not, has anyone got any recommendations? Assume a thin bit of copper would work fine as it's just acting as part of the live circuit right?
Thabks
Horn contact
Moderators: User administrators, Moderators
- Funkychops
- Registered user
- Posts: 34
- Joined: 01 Jul 2020, 15:39
- 80-90 Mem No: 0
Horn contact
1983 2L Air Cooled (CU) T25 Hightop
Based in Bristol
Based in Bristol
- Mocki
- Membership Admin
- Posts: 16957
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: Horn contact
Many years ago I had this issue on one of my vans , I cut a sutible bit of a old ( Bean) tin and soldered it onto the existing contact .
easy enough, just tinned the two bits and then applied minimum heat to them . Worked for years .
needs to be clean , non lacquered tin tho .
easy enough, just tinned the two bits and then applied minimum heat to them . Worked for years .
needs to be clean , non lacquered tin tho .
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper