The T3200E thread

for questions and answers about alternative power transplants on the T25, GTi, Porsche,Subaru etc, this is the place. You must register to post but anyone can read.

Moderators: User administrators, Moderators

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: The T3200E thread

Post by silverbullet »

This inlet elbow is trying my patience!
I have had to make a jig to approximate where the AFM connection is located in space (worked out from syncro inlet parts fitted to a DJ and using the exhaust port flange as a good datum) so I can work from there.
I think that there are too many compromises in trying to rework the 2wd elbow what with its compound angles and complex bends: there's still no space to get the crankcase breather and idle air feed into the joiner pipe and the throttle cable is too cramped, so I'll just cut the flanges off and use 70mm cast alloy 90 degree bends and straight pipe to put the throttle body where it really needs to be.
It'll be a better job in the end.ImageImage

Sent from my S60 using Tapatalk

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: The T3200E thread

Post by silverbullet »

Hmmm.
https://www.justkampers.com/marketplace ... w/id/8347/" onclick="window.open(this.href);return false;

Sent from my S60 using Tapatalk

User avatar
clift_d
Registered user
Posts: 3290
Joined: 04 Oct 2012, 23:51
80-90 Mem No: 11695
Location: Hackney innit

Re: The T3200E thread

Post by clift_d »

silverbullet wrote:Hmmm.
https://www.justkampers.com/marketplace ... w/id/8347/" onclick="window.open(this.href);return false;

Sent from my S60 using Tapatalk

£££££ :o
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro

ash1293
Registered user
Posts: 649
Joined: 27 Jun 2016, 10:49
80-90 Mem No: 16013
Location: York

Re: The T3200E thread

Post by ash1293 »

....plus shipping


Sent from my iPhone using Tapatalk
1990 1.9DG 34DAT carb Leisuredrive hightop

User avatar
clift_d
Registered user
Posts: 3290
Joined: 04 Oct 2012, 23:51
80-90 Mem No: 11695
Location: Hackney innit

The T3200E thread

Post by clift_d »

... and import duty ...
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro

User avatar
937carrera
Registered user
Posts: 3599
Joined: 05 Apr 2015, 19:29
80-90 Mem No: 16333
Location: N Yorks.

Re: The T3200E thread

Post by 937carrera »

..... aw, go on then, and VAT.......
1981 RHD 2.0 Aircooled Leisuredrive project, CU engine
1990 RHD 1.9 Auto Sleeper with DF/DG engine

ash1293
Registered user
Posts: 649
Joined: 27 Jun 2016, 10:49
80-90 Mem No: 16013
Location: York

Re: The T3200E thread

Post by ash1293 »

Hmmm think I may have to save a little longer if I’m wanting a bit more petrol poke.


Sent from my iPhone using Tapatalk
1990 1.9DG 34DAT carb Leisuredrive hightop

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: The T3200E thread

Post by silverbullet »

...and its running an unsupported aftermarket ecu with mapped ignition.
Good luck with that!

Sent from my S60 using Tapatalk

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: The T3200E thread

Post by silverbullet »

Looks like I need to make a linkage to keep the DJ throttle cable in the stock location (standard service parts, no further issues) and then step up & across to connect to the VDE throttle body, in a properly engineered fashion.
This should do it.
IMG_20191123_224210.jpg
(79.89 KiB) Downloaded 83 times

Sent from my S60 using Tapatalk

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: The T3200E thread

Post by silverbullet »

Note to myself: I'm going to give these people a go for wbx injector cleaning

http://www.injectortune.co.uk/Injector_Cleaning.html" onclick="window.open(this.href);return false;

Sent from my S60 using Tapatalk

User avatar
R0B
Moderator
Posts: 18842
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: The T3200E thread

Post by R0B »

They did mine a couple of years ago. Quick turnaround no complaints.
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
Aidan
Trader
Posts: 6519
Joined: 11 Oct 2005, 19:21
80-90 Mem No: 742
Location: Llanfyllin, mid Wales : )
Contact:

Re: The T3200E thread

Post by Aidan »

I've used this guy many times, last time back in November for a customer's vehicle, quick turnaround, value for money
https://www.injectorcleaning.co.uk/faq.htm

User avatar
R0B
Moderator
Posts: 18842
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: The T3200E thread

Post by R0B »

Oh hang on, I used the same one as Aidan. It was he who told me about that company.
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

User avatar
ajsimmo
Trader
Posts: 2697
Joined: 23 Mar 2009, 14:06
80-90 Mem No: 6542
Location: Isle of Arran
Contact:

Re: The T3200E thread

Post by ajsimmo »

Another vote for the Hull place. Nice to have Devizes as a backup option, so ta for t'link.

Sent from my ONEPLUS A3003 using Tapatalk
The Campershack - (website paused)
WBX Rebuilds & Upgrades from the beautiful Isle of Arran

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: The T3200E thread

Post by silverbullet »

I'll try the Devizes outfit and report back, 12.50 per injector is very keep pricing.

Sent from my S60 using Tapatalk

Post Reply