Captains seat armrest bolt covers
Moderators: User administrators, Moderators
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Captains seat armrest bolt covers
Nowhere to be found, these are missing from quite a few captains seats, not sure if the late seat adjustable armrest is the same bolt but somebody will know.
Fits over a standad M8 cap head bolt.
What we need is some kind soul with a 3d printer
Easily worth a fiver or more each when you consider a set of captains seats is £300+
P1100450 by Paul_Barr, on Flickr
P1100451 by Paul_Barr, on Flickr
P1100455 by Paul_Barr, on Flickr
Fits over a standad M8 cap head bolt.
What we need is some kind soul with a 3d printer
Easily worth a fiver or more each when you consider a set of captains seats is £300+
P1100450 by Paul_Barr, on Flickr
P1100451 by Paul_Barr, on Flickr
P1100455 by Paul_Barr, on Flickr
- clift_d
- Registered user
- Posts: 3294
- Joined: 04 Oct 2012, 23:51
- 80-90 Mem No: 11695
- Location: Hackney innit
Re: Captains seat armrest bolt covers
They're available on Shapeways:
http://shpws.me/OfX4" onclick="window.open(this.href);return false;
They're a bit pricey as a one-off but cheaper if you need to replace several.
http://shpws.me/OfX4" onclick="window.open(this.href);return false;
They're a bit pricey as a one-off but cheaper if you need to replace several.
1988 LHD T25 1.6TD Westfalia Club Joker Hightop syncro
Re: Captains seat armrest bolt covers
"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
Re: Captains seat armrest bolt covers
Ah yes, the shapeways model looks good. There's a slight dome to it that would make printing more complex, hence the comment about a 'support structure'. If the dome is important then it would have to be printed like a mushroom, and the support structure could be limited to the face that would be hidden when it's installed. If a flat top is ok, then it will print cleanly upside down without a support structure.
"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Captains seat armrest bolt covers
I think a flat top would look better, they are slightly domed but 3D printing just makes it stepped.
Thanks for the link clift_d not seen that before
and thanks Chris
Thanks for the link clift_d not seen that before
and thanks Chris
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Captains seat armrest bolt covers
I was prepared to buy the ones in the link but CJH had already offered to print some and because he is a perfectionist has made a better job of it than the ones in the link, cheaper too.
I also had a kind offer from diabolov, thanks again.
P1100464 by Paul_Barr, on Flickr
comparison VW to CJH can you spot which is VW?
P1100465 by Paul_Barr, on Flickr
perfect fit.
P1100466 by Paul_Barr, on Flickr
I also had a kind offer from diabolov, thanks again.
P1100464 by Paul_Barr, on Flickr
comparison VW to CJH can you spot which is VW?
P1100465 by Paul_Barr, on Flickr
perfect fit.
P1100466 by Paul_Barr, on Flickr
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Captains seat armrest bolt covers
I should add you can buy these from CJH now I have proven they fit
Cheaper than the ones in the link also
any colour as long as its black
Cheaper than the ones in the link also
any colour as long as its black
Re: Captains seat armrest bolt covers
Thanks Paul - glad they fit. 3D printing, at least the 'domestic' version, has its limitations. I used your sketch to reproduce the model precisely, but when I printed it the internal diameter (probably the only one that's critical) was approx. 0.2-0.3mm smaller than the design - a limitation of using plastic filament with a 0.4mm nozzle. But with a couple of iterations it came out as required. I had the same problem with the Pierburg choke parts which were professionally printed in Nylon using laser sintering - the dimensions didn't turn out exactly as modelled. A trivial issue when it only costs time on a domestic printer, but more of an issue when it costs ~£60 a go.
Happy to make more of these bolt caps if people want them - £1.50 each or £5 for a set of four, plus postage. As Paul says, I only have black (or white) filament at the moment. If there's demand I might invest in some brown, although in Paul's photo the original looks black.
Happy to make more of these bolt caps if people want them - £1.50 each or £5 for a set of four, plus postage. As Paul says, I only have black (or white) filament at the moment. If there's demand I might invest in some brown, although in Paul's photo the original looks black.
"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
Re: Captains seat armrest bolt covers
I am after 1 of these though will buy as many as needed to get a sale. Are they still being made or does anyone have any spare? Thanks.
1989 Devon Kameo hitop 1.9 petrol DG
1985 South African micro bus 1.9 DG
1985 South African micro bus 1.9 DG
- Ant-t
- Registered user
- Posts: 1955
- Joined: 05 Jan 2015, 14:17
- 80-90 Mem No: 14390
- Location: West Sussex
Re: Captains seat armrest bolt covers
I missed this thread, I would be very interested in buying 2 of these, is anyone producing and selling?
1983 DG Kamper 2
- itchyfeet
- Registered user
- Posts: 12427
- Joined: 23 Jul 2007, 17:24
- 80-90 Mem No: 12733
- Location: South Hampshire
Re: Captains seat armrest bolt covers
clift_d wrote:They're available on Shapeways:
http://shpws.me/OfX4" onclick="window.open(this.href);return false;
They're a bit pricey as a one-off but cheaper if you need to replace several.
link does not work anymore but why not contact them and ask, somebody will produce them for the right price.
bottom of this page
https://www.shapeways.com/partnership/" onclick="window.open(this.href);return false;
I have done all the hard work and you even have a drawing and pictures.