Replacing the dashboard plastic PCB
Moderators: User administrators, Moderators
Re: Replacing the dashboard plastic PCB
Thanks for the photos. Is that rod metal? Any idea what it's for? I have a home-made housing, but I don't recall seeing that rod on a genuine housing that I had in recently.
The company I've been using for PCBs is JLCBCP. I can't speak highly enough of them - always prompt service and good quality. Minimum quantity is 5 I think, but 10 will cost you the same! Prices go up if your board is bigger than 100mm x 100mm (like my dash PCB), or has a special finish (like the gold plating on my 'fingers' board), but usually one of the biggest cost items is the shipping, unless you're prepared to wait for the slow boat from China. But if you pay for the DHL shipping you will usually have your boards in your hands a week after ordering them. I usually combine shipping with a parts order from their sister company LCSC.
The company I've been using for PCBs is JLCBCP. I can't speak highly enough of them - always prompt service and good quality. Minimum quantity is 5 I think, but 10 will cost you the same! Prices go up if your board is bigger than 100mm x 100mm (like my dash PCB), or has a special finish (like the gold plating on my 'fingers' board), but usually one of the biggest cost items is the shipping, unless you're prepared to wait for the slow boat from China. But if you pay for the DHL shipping you will usually have your boards in your hands a week after ordering them. I usually combine shipping with a parts order from their sister company LCSC.
"I'm a man of means, by no means....King of the Road!"
1983 Viking Xplorer, 2.1DJ
1983 Viking Xplorer, 2.1DJ
- 3cylinders
- Registered user
- Posts: 34
- Joined: 04 Feb 2018, 11:19
- 80-90 Mem No: 16794
- Location: Leyland
Re: Replacing the dashboard plastic PCB
Hi Chris,
Thanks of the info on the PCB supplier. The rod is plastic, it doesn't seem to have any function other than providing clip support for the top part of the case. If you click in and open the image up you can make out the (broken) quarter-circle plastic clips which grip either side of the protruding rod. It doesn't penetrate through a hole in the housing at the lower end but merely seems to begin there, so cutting it out hasn't made any difference to its function as far as I can make out.
If anyone thinks it does something different I'd love to know - or not - now that I've mutilated my pod
Simon
Thanks of the info on the PCB supplier. The rod is plastic, it doesn't seem to have any function other than providing clip support for the top part of the case. If you click in and open the image up you can make out the (broken) quarter-circle plastic clips which grip either side of the protruding rod. It doesn't penetrate through a hole in the housing at the lower end but merely seems to begin there, so cutting it out hasn't made any difference to its function as far as I can make out.
If anyone thinks it does something different I'd love to know - or not - now that I've mutilated my pod
Simon
1991 1.9 DG Petrol Bus manual transmission
Re: Replacing the dashboard plastic PCB
@cjh I have send you a PM I would like to buy a kit please
Thanks
Matthew
Thanks
Matthew
Re: Replacing the dashboard plastic PCB
Do you still have these? I am working on 2 vans at the moment and need to fix the dash in them.
Thanks
Matthew
Member Number: 16854
-
- Registered user
- Posts: 15
- Joined: 07 Nov 2018, 13:02
- 80-90 Mem No: 0
Re: Replacing the dashboard plastic PCB
Bonjour
J'ai commandé un nouveau PCB à Chris (CJH) c'est un génie...! Le PCB fonctionne parfaitement c'est formidable. J'ai pris l'option témoin de jauge essence, c'est vraiment génial. J'habite en France, et beaucoup de passionnés cherche un nouveau PCB. Et puis Chris ne réponds plus depuis plusieurs mois aux messages... j'ai des amis qui on besoin de lui faire des commandes. Quelqu' un peux m'aider, merci beaucoup.
J'ai commandé un nouveau PCB à Chris (CJH) c'est un génie...! Le PCB fonctionne parfaitement c'est formidable. J'ai pris l'option témoin de jauge essence, c'est vraiment génial. J'habite en France, et beaucoup de passionnés cherche un nouveau PCB. Et puis Chris ne réponds plus depuis plusieurs mois aux messages... j'ai des amis qui on besoin de lui faire des commandes. Quelqu' un peux m'aider, merci beaucoup.
Re: Replacing the dashboard plastic PCB
@cjh I have send you a PM I would like to buy a kit and the low fuel module please.
-
- Registered user
- Posts: 42
- Joined: 06 Apr 2010, 20:48
- 80-90 Mem No: 8048
- Location: Choppington, Northumberland
Re: Replacing the dashboard plastic PCB
@cjh I have also sent a PM and need a kit.
Thanks
Sent from my SM-A520F using Tapatalk
Thanks
Sent from my SM-A520F using Tapatalk
1986 1.9 DG manual WBX
- bene
- Registered user
- Posts: 926
- Joined: 03 Jan 2014, 14:39
- 80-90 Mem No: 13093
- Location: Newquay, Cornwall
Re: Replacing the dashboard plastic PCB
I am trying to contact Chris too...
Does anybody know what's up? I'm pretty sure he has seen my messages but had nothing back.
It's a great kit and I would recommend it.
Does anybody know what's up? I'm pretty sure he has seen my messages but had nothing back.
It's a great kit and I would recommend it.
Any one for cricket? what what?
-
- Registered user
- Posts: 36
- Joined: 26 Jun 2015, 12:31
- 80-90 Mem No: 0
Re: Replacing the dashboard plastic PCB
I've just messaged him too. But in preparation, can someone tell me what resistance wire I need, thin sleeve? 20 amp? I'm not sure. I'#ve found a suitable 15 pin connector https://www.carbuildersolutions.com/uk/ ... way-single" onclick="window.open(this.href);return false;, I know where to get the vero board, etc.
Since I took the dashpod out, my bus won't start. Is this normal? All I'm getting is the solenoid clicking in.
Since I took the dashpod out, my bus won't start. Is this normal? All I'm getting is the solenoid clicking in.
- bigbadbob76
- Registered user
- Posts: 1733
- Joined: 07 Nov 2016, 14:41
- 80-90 Mem No: 15707
- Location: Isle of Skye
Re: Replacing the dashboard plastic PCB
assuming you mean for the dash pod PCB- 16/0.2 pvc covered wire will be fine but...BackForMore wrote:can someone tell me what resistance wire I need, thin sleeve? 20 amp? I'm not sure.
If you get a kit from Chris it comes with all the wires and parts you need and the printed board so you don't need wire or veroboard.
Chris's kit is very reasonably priced, I couldn't build a one off veroboard one for the price he's charging.
He buys the parts in bulk so that cuts down the cost.
re: your non starting, you don't say what engine you have but if your starter solenoid (on the back of the starter motor) is clicking then it's nothing to do with the dash pod.
However... if you're hearing a relay clicking but not the solenoid then it could be to do with the dash pod depending what engine you have.
'86 1.9 DG, 4 spd, tintop, camper conversion.
Split case club member.
Split case club member.
-
- Registered user
- Posts: 36
- Joined: 26 Jun 2015, 12:31
- 80-90 Mem No: 0
Re: Replacing the dashboard plastic PCB
Thanks for that. I'll PM Chris and get me one of them kits I think.
Mine's a 1.9 DG. I found the problem, it was a bad earth on the starter motor.
Mine's a 1.9 DG. I found the problem, it was a bad earth on the starter motor.
Re: Replacing the dashboard plastic PCB
New here, also desperately want this kit. I've sent a PM.
1980 Joker Westfalia CU
Re: Replacing the dashboard plastic PCB
I sent a PM too weeks ago
it has been read but got no reply.
Rick
it has been read but got no reply.
Rick
____________________________________________
84 CaravelleGL 1.9 DG WBX Bronze Beige Metallic auto
84 CaravelleGL 1.9 DG WBX Bronze Beige Metallic auto
-
- Registered user
- Posts: 42
- Joined: 06 Apr 2010, 20:48
- 80-90 Mem No: 8048
- Location: Choppington, Northumberland
Re: Replacing the dashboard plastic PCB
I ended up getting the cluster master kit from campervan culture, £140 but easy to fit and works well.
Hasn't fixed my buzzer of doom though! The search continues.....
Sent from my SM-A520F using Tapatalk
Hasn't fixed my buzzer of doom though! The search continues.....
Sent from my SM-A520F using Tapatalk
1986 1.9 DG manual WBX