auto gearbox
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 78
- Joined: 05 Jul 2006, 22:30
- 80-90 Mem No: 3146
- Location: canvey island
auto gearbox
Has anyone replaced the sump plate on a autobox? i cant stop the leak in mine, it's had a few whacks in the past and because its only pressed steel it isn't rigid enough and only held by 4 bolts. I'm going to make my own sump out of steel plate at work, has anyone else had this problem?
-
- Registered user
- Posts: 21
- Joined: 03 Aug 2006, 19:56
- 80-90 Mem No: 0
- Location: southwales
- Ivor Brownun
- Registered user
- Posts: 680
- Joined: 11 Oct 2005, 16:50
- 80-90 Mem No: 732
- Location: Plymouth Member 732
-
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Not had the prob specifically on the auto box, but in general a small leak developes and gets nipped up (too much)which makes it leak more.
This distorts the pan and the bolt hole becomes cone shaped, you can take it off and attend to it and refit with new gaskets and suitable gunge, torque it down and dont be tempted to overtighten.
Nice piece of dural would be good
Mike
This distorts the pan and the bolt hole becomes cone shaped, you can take it off and attend to it and refit with new gaskets and suitable gunge, torque it down and dont be tempted to overtighten.
Nice piece of dural would be good
Mike
-
- Registered user
- Posts: 21
- Joined: 03 Aug 2006, 19:56
- 80-90 Mem No: 0
- Location: southwales
Thanks for the replies, If its a good 'un I will make an offer, the bodywork looks good from photo's, I'll have to see if it has had a recent blow-over or if it really is as good as the pictures.What does "nipped up" mean?? Is it when people have kept tightening the bolts hoping to cure a leak??
We don't mind the low MPG, we really only 'intend' to use it for holidays and if the regular cars are off the road, mind you, I gather they are fun to drive
Is - £2000 a lot to pay, full size R'n'R bed, drive away awnind, built in rear heater,double sliding doors, no sink or fridge, Zig unit "kit"(not fitted I'd guess)is a Zig unit the 240v thing??,no table,floor looks like tung and groove,6 x seats with arms in the back and thermo screens.
Nothing about milage or servicing mentioned!!!!!
Sorry to have interupted Tangalooma flier (like your handle )
We don't mind the low MPG, we really only 'intend' to use it for holidays and if the regular cars are off the road, mind you, I gather they are fun to drive
Is - £2000 a lot to pay, full size R'n'R bed, drive away awnind, built in rear heater,double sliding doors, no sink or fridge, Zig unit "kit"(not fitted I'd guess)is a Zig unit the 240v thing??,no table,floor looks like tung and groove,6 x seats with arms in the back and thermo screens.
Nothing about milage or servicing mentioned!!!!!
Sorry to have interupted Tangalooma flier (like your handle )
- SplendiferousII
- Registered user
- Posts: 178
- Joined: 01 Aug 2006, 08:09
- 80-90 Mem No: 2893
- Location: Membership No 2893 Cornwall / Gloucestershire
Is it possible to drill a number of additional holes around the rim of the sump pan and match drill the casing to suit? An alloy replacement would be best if you can get that made at work and take a skim off the face to get it nice and flat after welding.
Mablethebus - I had an auto 20ltr Aircooled a few years ago and it was great, drank fuel mind you. But was reliable enough and you would never have known it only had three gears.
Mablethebus - I had an auto 20ltr Aircooled a few years ago and it was great, drank fuel mind you. But was reliable enough and you would never have known it only had three gears.