front doors

[kefoley1]

hi guys and dolls .
anyone out there know where i can get the lower inner repair panels
for l/h and r/h cab doors for my t25 camper ?
any help much appreciated . cheers.

[kevtherev]

might be easier and quicker to get a used door and either cut it up or fit it.

there ain't no new ones about now

[kefoley1]

Bugger ! ok , thanks for that man .

[Cruz]

Live with it if you can and keep an eye out.

I picked up an excellent passenger door from the bay of fleas for £15

Just make sure the replacement is in good condition in the usual rot places like at the bottom and around where the handles fit

[Cyrus]

^^^^^^^ whs

I picked a pas door from fleabay for 99p, I gave the guy a tenner cos it was such a good door.

[kefoley1]

many thanks to all !

sounds like you got some pukka deals !

[Plasticman]

hi,it helps if you give your location ,
i have a pair of nice doors and you might be 10 miles away so its feasable but you could also be 200 miles away ,
loads of doors available from folk on here
mm

[kefoley1]

hello, good point !
im in west london,
cheers for that.

[kefoley1]

hi mm, on the off chance, what sort off dosh
you looking at for your doors ? got a mate passing thru
your way to london on tuesday, cheers.

[Plasticman]

YGM
mm

[kefoley1]

Hi pro's ! Has anyone out there got photos of junction of inner sill and c or b post ?
Just fitting my first inner sill with a welder mate of mine and have not got a scooby doo
of how it is supposed to look before fitting rear arch and outer sill ! Any help much needed.
MANY THANKS INDEED

[kevtherev]

take a look at any of the metalmick8y threads

posts in abundance

[kefoley1]

thanks kevtherev, i am not only crap at doing up my van ! i am also crap on computers !
im a joiner/cabinet maker by trade so dont use them. how do i get to a metalmick8y THREAD ?
sorry and cheers man.

[Plasticman]

https://club8090.co.uk/forum/viewtopic.p ... lack+of+it" onclick="window.open(this.href);return false;
https://club8090.co.uk/forum/viewtopic.php?f=38&t=84062" onclick="window.open(this.href);return false;
and kevs
https://club8090.co.uk/forum/viewtopic.php?f=38&t=93497" onclick="window.open(this.href);return false;
should take an hour to read, tookm a bitg longer to do
did you get some doors sorted
mm

[kefoley1]

many many thanks to metalmick8y and kevtherev !
re inner sill junctions to b and c posts.
cracking work and photos mm.
i on the other hand am miles out of my depth, taken old inner sill out,
got new one from schofields.
cut a section out of inner front wheel arch, and shuttle fitted it on top of jacking points
so as not to touch what is left of b and c pillars. make sense ? prob not, but looks ok .
got 2 brilliant condition primed cab doors on ebay for £150 metalmick8y, thanks for asking.

you guys really do know your stuff ! thanks again pros. kefoley1