Hi
Bought some pentas but the bolt holes are too small.
Is it an easy job to drill them out bigger? Only needs a slight expansion.
Any advice given greatly received
cheers
Need to drill out bolt holes on pentas
Moderators: User administrators, Moderators
Need to drill out bolt holes on pentas
1982 Air cooled
If my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious sh*t
If my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious sh*t
Re: Need to drill out bolt holes on pentas
dont think anyone will put there name to a definate answer for liability issues
but i will confirm it has been done many times, using the correct size drill.
BUT DO IT AT YOUR OWN RISK
but i will confirm it has been done many times, using the correct size drill.
BUT DO IT AT YOUR OWN RISK
-
jamesc76
- Registered user
- Posts: 6241
- Joined: 14 Oct 2005, 14:42
- 80-90 Mem No: 1186
- Location: Nottingham
- Contact:
Re: Need to drill out bolt holes on pentas
do you have access to a large pillar drill to keep everything exactly square? The slightest bit wrong will end up in bad times!!!
DJ at Dubdayz Summerfest
Now cutting about in an LT35 MWB
Now cutting about in an LT35 MWB
Re: Need to drill out bolt holes on pentas
Thanks guys
Decided to take them to an engineering shop.
They can crack on with it
Decided to take them to an engineering shop.
They can crack on with it
1982 Air cooled
If my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious sh*t
If my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious sh*t