t25 Viking

Post by **fryup** » 27 Oct 2010, 19:28

I bought a Viking earlier in the year and in the roof there are no cushions up there. can somebody with a viking help me.

Post by **armyphil** » 27 Oct 2010, 20:33

Do what?
Size, colour, what you need? Pictures?

Post by **kevtherev** » 27 Oct 2010, 20:44

I think someone with a viking could measure the mattresses, Daz watson has a Viking he may spot this and get his tape out.

Post by **fryup** » 28 Oct 2010, 05:19

I need some sizes and shapes of the cushions so that I can get some made up to fit. And pictures would help too.

Cheers Andy

Post by **Steve P** » 28 Oct 2010, 10:01

Hello mate, is this the sort of thing you are after.....
Single bed cushion

Double bed

You can see that each "bed" needs 3 cushions to enable them to be folded. When I get rid of my visitors I'll go out and measure the sponge

Post by **fryup** » 28 Oct 2010, 10:08

Thanks that would be brilliant

Cheers Andy

Post by **Steve P** » 28 Oct 2010, 11:03

As promised here are the approximate sizes of the sponge.
It's all 4.5 cm thick, hope it's what you were after.....

Post by **fryup** » 28 Oct 2010, 17:17

Thanks for that Just wondered if you could help me out with one other thing, in the picture where the arrows are is there meant to be wood or cushions because you can see the canvas.

cheers Andy

Post by **Steve P** » 28 Oct 2010, 19:18

Are you talking about the part of roof that overhangs the sliding door? If you are, we have material.

Post by **fryup** » 28 Oct 2010, 19:39

Yes I am ok thanks for all the help. Another question I have that you may able to help me with is I have a hole in the cupboards and I know that a fridge should go there do you have a fridge, and if you do what make and model is it.

Cheers Andy

Post by **Steve P** » 28 Oct 2010, 20:27

We had to replace our old tired one with something a bit better, but it was too big for the hole so I had to turn carpenter and make it fit.
Trouble is I cant remember the model number, I'm sure it was a Electrolux RM123

Post by **dazwatson** » 30 Oct 2010, 07:54

kevtherev wrote:I think someone with a viking could measure the mattresses, Daz watson has a Viking he may spot this and get his tape out.

Thanks Kev, just spotted this thread, looks like Steve has sorted it out, my lay out is the same.

Any more questions

Post by **kevtherev** » 30 Oct 2010, 07:56

what about your fridge Daz.. this fella wants to put one in but doesn't know which model no. it is

any clues?

Post by **Steve P** » 30 Oct 2010, 21:03

Found a pic of the model fridge that we had, this pics from another van. Might jog someone's memory.

Post by **kevtherev** » 31 Oct 2010, 09:55

hmmm that does look like an RM122

Here's a fitting manual and some operating instructions.. all provided by your fabulous club!
If you scroll down there's some dimensions
RM122 refrigerator

Club 80-90 Forums

t25 Viking

t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking

Re: t25 Viking