clutch slave bracket and juddering

Post by **macalfie** » 23 May 2010, 13:48

Hi all the vans juddering when you start off in first gear once on the move all is ok .noticed the bolt on the gearbox that holds the bracket to the slave cylinder has snapped or rusted off would this cause the judder or could it be the gearbox mount.also how would i get the broken bolt out cheers mac.

Post by **fullsunian** » 23 May 2010, 14:12

Have you got any oil leaks in the bell housing? Any oil on the clutch plate will make it judder..

Post by **Ian Hulley** » 23 May 2010, 14:13

As will a buggered front mount.

Post by **macalfie** » 23 May 2010, 14:36

no oil leaks. front mount looks worn but dont want to spend £120 on a front mount and still have judder

Post by **jamesc76** » 23 May 2010, 15:28

gonna have to strip it then!

Post by **macalfie** » 23 May 2010, 15:31

cheers guys

Post by **Ian Hulley** » 23 May 2010, 15:47

macalfie wrote:no oil leaks. front mount looks worn but dont want to spend £120 on a front mount and still have judder

If you think you've no leaks but KNOW you've got a worn front mount you ought to replace the worn part anyway.

Club 80-90 Forums

clutch slave bracket and juddering

clutch slave bracket and juddering

Re: clutch slave bracket and juddering

Re: clutch slave bracket and juddering

Re: clutch slave bracket and juddering

Re: clutch slave bracket and juddering

Re: clutch slave bracket and juddering

Re: clutch slave bracket and juddering