Does anyone know if the bottom hinge/roller of the sliding door is the same for early and later models or were they changed as well?
Thanks in advance
sliding door
Moderators: User administrators, Moderators
-
Fritz
- Registered user
- Posts: 1628
- Joined: 17 Jul 2006, 22:51
- 80-90 Mem No: 380
- Location: Ormskirk, Lancashire
Re: sliding door
After owning both early and the later model vans I would be bold enough to stick my neck out to say they appear to be very similar through out the range.
Regards
Fritz,,,,,,,,,
Regards
Fritz,,,,,,,,,
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
-
jake1953
- Registered user
- Posts: 246
- Joined: 29 Dec 2008, 14:30
- 80-90 Mem No: 6196
- Location: Preston Lancs.
Re: sliding door
Cheers Fritz. I can't get enough adjustment on the bottom roller to have the door fully tight against the door surround rubber. when it's fully adjusted in, there is about 1cm of "play" where the door can be moved in and out by hand. The vertical roller bearing wheel is a bit noisy and the horizontal guide wheel looks in an ok condition. any ideas? I see one for sale on ebay hence my original question but could it be something else?