Just bought (my first) t25 - 1990 Hi-top.
It didn't come with a wheel brace or a jack (unless they're hidden away somewhere).
What jack do people recommend to pack on the bus (not a 10 ton trolley jack!)
Thanks
Simon
What Jack for a Standard T25?
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 206
- Joined: 10 Oct 2005, 06:53
- 80-90 Mem No: 38
- Location: near Kendal, Cumbria, England
- Contact:
Jack the van
I reckon the standard jack is fine for emergency roadside wheels changes - provided the jacking points are good and strong - as in not unduly corroded. The jack is compact and reasonably light so good to keep in the camper at all times. A telescopic wheel nut tool is also a good move for the high torque that the nuts need.
For maintenance work at home different rules apply and I use a trolley jack and stands, ramps, wooden blocks etc according to the job in hand.
For maintenance work at home different rules apply and I use a trolley jack and stands, ramps, wooden blocks etc according to the job in hand.
Keith
Membership number 38
Membership number 38
-
- Registered user
- Posts: 124
- Joined: 11 Oct 2005, 12:23
- 80-90 Mem No: 0
- Location: London, or chuggin' along the A303
I use the standard jack for wheel changes etc, but for underneath the van I use the 'scrabble around in the dirt, get grease everywhere, rust flakes in my eyes, and bang my head on every prominent part' technique
One day I'll own an oversize garage with a pit...

One day I'll own an oversize garage with a pit...

One T25 in London, another one in Sydney.
-
- Registered user
- Posts: 961
- Joined: 09 Oct 2005, 17:27
- 80-90 Mem No: 830
Two options, Mr Chugster - axle stands or ramps - gets yer van up in the air and reduces the filth in eyes effect.
Damned site cheaper than an oversized garage and has less planning regulations!
Damned site cheaper than an oversized garage and has less planning regulations!
Diamond Hell
Still Syncro, just much fasterer
Still Syncro, just much fasterer
- Tex Ritter
- Registered user
- Posts: 436
- Joined: 10 Oct 2005, 09:14
- 80-90 Mem No: 1057
- Location: Northumberland.
- Tex Ritter
- Registered user
- Posts: 436
- Joined: 10 Oct 2005, 09:14
- 80-90 Mem No: 1057
- Location: Northumberland.
OOOOPs!
Mocki's right I should have said sitting on TOP of spare wheel...that's where my VW one lives...along with tool kit and spare electric hook-up cable.
On the very rare occasions they are required they can be accessed by removing the grill...not the spare wheel of course!
Tex Ritter

On the very rare occasions they are required they can be accessed by removing the grill...not the spare wheel of course!
Tex Ritter
If you never have a route planned ...how can you ever be lost?
- Ivor Brownun
- Registered user
- Posts: 680
- Joined: 11 Oct 2005, 16:50
- 80-90 Mem No: 732
- Location: Plymouth Member 732