Paint Your Wagon - with a roller!

Thin bits of metal and bright blue light. Including glass & trim.

Moderators: User administrators, Moderators

User avatar
HarryMann
Admin/Mod
Posts: 9588
Joined: 30 Sep 2005, 11:40
80-90 Mem No: 379
Location: Herts, UK

Post by HarryMann »

Think we could find space to put that video up somewhere, please send to me at:

moderator@club80-90syncro.co.uk

Thanks!
The 80-90 Tech Wikipedia Your 1st port of call :idea

1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1

User avatar
CovKid
Trader
Posts: 8409
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

Sent, and by the way, the full colour chart is REALLY inspiring.

Murdoch - good to hear you're giving it a go. The magic is in the thinning down. Too much and it'll run off, too little and it goes on like toffee. Get it right and its smooth as silk!

Bad time to do outdoors at mo unless you start before the insects start buzzing around.

Get your pics up Murdoch!!!

User avatar
murdoch
Registered user
Posts: 129
Joined: 31 Oct 2006, 20:08
80-90 Mem No: 1829
Location: Bude

Post by murdoch »

i did notice today, that my colleages black 06 reg Hyoondie 4x4 thing has a paint finish that equals my first roller coat!!! albeit a little shinier!
so you could get away with not flatting back if didn't want too.
i just wanted me van to be all one colour for the mot man, so a couple of coats will do fine for that, if ( sorry, when) it passes and when i get a little more time i can flat, polish and roll when ever i need.
murdoch

User avatar
CovKid
Trader
Posts: 8409
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

Not bad though Murdoch is it? You're quite right though, even unflatted its not far off some new cars straight off the production line. If you go back and rework areas you did four minutes ago you can run into problems but if you work fast you can get a very acceptable finish.

I presume you saw the photo a page back with a flatted area on the front end of my bus? You do need at least four coats to give you something to cut back to but generally two to three coats will obliterate a patchy looking T25 if you don't want to bother flatting.

In any event it'll look smarter than a shabby rusty wedge and shrugs off British weather no problem. Have a go at washing it Murdoch - its hilarious - nothing sticks - soapy water runs straight down. Most odd!

Cruz
Registered user
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Post by Cruz »

This has really inspired me to finally get my knackered drivers side panel fixed and passenger side rear wheel arch ready for my own roller paint attempt next April. It will take me that long as I'll not do the bodywork fixes until this years camping season is over (oct) as I'll need to take the interior out to see the full extent of the damage to the sill as the panel has finally split underneath the 'hide the rust' plate. :cry:

Going to order the vactan and paint now so I've got it all ready.

Covkid how many coats did you do? 3 at 25% plus a final coat at 50% thinners?

Thanks again for the inspiration

User avatar
HarryMann
Admin/Mod
Posts: 9588
Joined: 30 Sep 2005, 11:40
80-90 Mem No: 379
Location: Herts, UK

Post by HarryMann »

Here's a video taster from Ralph and Ron...

http://www.syncronauts.org.uk/roller_technique.wmv

More to come, when we'll put a link in the Wiki to it.
The 80-90 Tech Wikipedia Your 1st port of call :idea

1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1

User avatar
CovKid
Trader
Posts: 8409
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

Coats - 4 minimum for flatting back. 5 is luxury but you'd need some flatting between layers to keep it all reasonably level and to remove tiny high points. The thinning ratio depends on weather/temperature but as a guide, try 15-20% to start with. What you're aiming for is a thin custard - not watery. 20-25% may be a bit too thin sometimes. The thin custard is a good rule of thumb though and you can adjust if need be.

Forget the 50% thinners. Its far too watery. I tried!

You get the paint on fast and aim for good cover on a panel then spend those extra moments with barely any pressure on the roller taking out any roller marks and picking up odd runs but once it looks ok, DON'T come back to it - let it dry. just watch any areas where there are lips as paint can build up on these areas and cause runs beneath.

You will get roller marks but Rob and I found that you could move these to the edges of panels by rollering in an opposite direction - hard to describe unless you do the job yourself. Theres so much satisafaction in losing the roller marks and then seeing the panel half an hour later as it dries off - without a blemish.

As a reminder (and check my notes in the WIKI), these are high density gloss roller heads. Don't attempt this with cheap roller heads - waste of time. The handles and trays all came from local pound shops but you MUST use pro gloss rollers or you'll be artexing your pride and joy.

Sometimes with a new roller that hasn't been fully saturated to remove air bubbles, you'll get millions of tiny air bubbles when you roller. Too much thinners will do it too. These will come out with just roller pressure but try to ensure the roller has been fully saturated then remove excess before applying to your wedge and that you haven't thinned it too much - it's less fuss.

ChickenKoop had never applied paint in this way but after 20 mins on his own I let him get on with it and concentrated on spotting bits he'd missed or getting in front of him with a sponge brush in those areas that are awkward with a roller like the tops of windows. It works well if theres two of you as the other can keep the roller tray topped up and point out glaring errors before they flash dry.

Rollers CAN break up, particularly if they catch a rough edge somewhere so its useful to have a mate who can get a fresh roller saturated for you so you don't need to stop.

Like any kind of paint job, prep IS essential. Badly flatted filler will look CRAP when it has paint on so weeks spent flatting and priming (to highlight imperfections) are time well spent in my view. Rustoleum will otherwise go over any properly keyed surface.

If you get the odd bug decide to hang around, masking tape will often pick them off but don't paint if the air is full of them - thats suicide.

User avatar
wasserleaker
Registered user
Posts: 106
Joined: 23 Oct 2006, 19:23
80-90 Mem No: 3058
Location: derby's. Caravelle Carat, 2.1 L.P.G'd DJ
Contact:

Post by wasserleaker »

thinking of painting my 'no two quite the same colour' fibreglass big bumpers and side planks by roller now, was going to get a place we deal with at work to spray em up, satin black, but think the gloss mini-roller method is worth experimenting with first, a few brushed on coats maybe, finished with a couple of roller coats, left un-flatted, stipply finish? will experiment! :)

User avatar
CovKid
Trader
Posts: 8409
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

Just roller em. You'll get a nigh on perfect finish with matt!

User avatar
wasserleaker
Registered user
Posts: 106
Joined: 23 Oct 2006, 19:23
80-90 Mem No: 3058
Location: derby's. Caravelle Carat, 2.1 L.P.G'd DJ
Contact:

Post by wasserleaker »

Thanks, Covkid, only just noticed that they do a satin black, ideal for the bumpers.might be good on my kite buggy too, its a never ending job to keep it from rusting as it get used on beaches, forever sanding off rust and re-painting with lesser paints.

User avatar
CovKid
Trader
Posts: 8409
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

Its worth getting hold of the FULL paint chart as it covers MANY more colours than you realise. You can even get clear!

Image

Cruz
Registered user
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Post by Cruz »

Any links to the full chart?

User avatar
CovKid
Trader
Posts: 8409
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

No - you have to order that. Besides, unless you have a high-end monitor, the colours shown will be well off.

I must say, conditions for rollering outdoors have been diabolical lately. I did get a slight scratch the other day but a couple of goes with the roller and it was gone!

Anyone in or near Coventry thinking of rollering theirs?

User avatar
toolsntat
Registered user
Posts: 1110
Joined: 28 Oct 2005, 22:41
80-90 Mem No: 644
Location: Leicesterish

Post by toolsntat »

If I ever get this lot sorted before it falls to bits :roll:

http://s34.photobucket.com/albums/d128/ ... 2f1962.pbw

I would really consider it my best option , mind you the finish your getting makes me think a quick flash over with one coat would be more than enough to improve mine even without a body tart up :oops: :oops:

Need to splash a bit of Vactan around first off :wink: It don`t have gap filling capabilities by any chance does it ?? :lol: :lol:

Anyone fancy using me van to practice on :shock: :shock:
------------------
"GOT ANY OLD TOOLS??"
"WANT ANY OLD TOOLS??"
WANTED old treadle lathe please......
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
1980 2.0L Aircooled Blue Hightop Holdsworth Villa Camper
2002 White 2.0l 280 td swb hightop Tranzit works van

User avatar
VWlewis
Registered user
Posts: 256
Joined: 22 Oct 2006, 21:21
80-90 Mem No: 2852
Location: Nottinghamshire - near Lincoln!
Contact:

Rustoleum on-line Colour chart

Post by VWlewis »

Here it is ....

http://www.tooled-up.com/Artwork/ProdPD ... 0CHART.pdf

I haven't seen a printed one...

where you can get a printed one? :(

Just done my first coat on my spare tailgate - very impressed with the paint even with the wrong roller ... not so impressed with my prep! :lol:
Image
VW Fan :D Learned to drive in a T2, then drove a T1, later a T4, then a T5 (and a few Audis and Passats)
Now a proud T3 Caravelle GL 2.1 DJ WBX owner: "Dora the Explorer" .. by my reckoning, a T15 Driver!
Dr T15 Speaks!

Post Reply