Need a t connector for the vacuum system? Any ideas
Moderators: User administrators, Moderators
Need a t connector for the vacuum system? Any ideas
Hi Guys,
The T piece on the vacuum circuit has perished, they used to keep them on JK, but they seem to do much less T25 spares than they used to??
Can't see it there any suggestions?
Yours in a roughly running style...
The T piece on the vacuum circuit has perished, they used to keep them on JK, but they seem to do much less T25 spares than they used to??
Can't see it there any suggestions?
Yours in a roughly running style...
1981 Aircooled Danbury - Standard 2.0 Cu, with LPG from Gasure
- phredd
- Registered user
- Posts: 2395
- Joined: 09 Feb 2006, 21:22
- 80-90 Mem No: 2626
- Location: Doing 74mph down a dead end street. >>> in Runcorn.
- Contact:
- Have you thought of trying your local Tropical Fish shop (waits for the silly comments )
they may have what you need in a PVC type.
Might do the trick.
Phredd
Life is like a sewer, what you get out of it depends on what you put into it.
Membership No = 2626 @ Runcorn
IN ARDUIS FIDELIS.
Membership No = 2626 @ Runcorn
IN ARDUIS FIDELIS.
- geordie skydiver
- Registered user
- Posts: 141
- Joined: 10 May 2006, 07:51
- 80-90 Mem No: 2988
- Location: Durham
- Contact:
-
- Registered user
- Posts: 1567
- Joined: 27 Sep 2005, 18:42
- 80-90 Mem No: 500
- Location: Somewhere in my Syncro
I managed to fine something similar in a Carb kit.
So i guess it's just a case of finding something to fit, thanks for the contacts in oxford !
Let you know where i find them.
Did I miss something with JK reducing the number of parts they seem to carry??
So i guess it's just a case of finding something to fit, thanks for the contacts in oxford !
Let you know where i find them.
Did I miss something with JK reducing the number of parts they seem to carry??
1981 Aircooled Danbury - Standard 2.0 Cu, with LPG from Gasure