Idle stabiliser unit and LPG

LPG, Bio Diesel, Hydrogen, Fuel Cell Questions and Answers last answered over 2 years ago.
You may also want to visit the 80-90 Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics.

Moderators: User administrators, Moderators

Locked
tootingblue
Registered user
Posts: 9
Joined: 05 Feb 2006, 21:10
80-90 Mem No: 2655
Location: Birmingham, UK 2655

Idle stabiliser unit and LPG

Post by tootingblue »

Any help much appreciated folks!

My T25 Devon 2 litre A/C is converted to gas, however it is with a garage to sort out some very poor running. They don't do gas (!) so they're sorting it to run on petrol. Once that's done it's off to Steve at Gasure to sort the gas system.

Turns out the idle stabiliser unit is shot as is the wiring in and out. of it My man at the garage has by-passed it and will set up the idle speed using the carbs. Trouble is the carbs are redundant when the van runs on gas! Do I need this part of the ignition in order to run on gas? He thinks not as he reckons you should always start up on petrol then switch to gas, then back to petrol before switching off. Not sure this sounds practical or realistic!

Views/opinions/hard facts please!

Cheers

Ed

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Post by kevtherev »

Gasure conversions start on gas....and no I don't think you need the stabiliser for gas
AGG 2.0L 8V. (Golf GTi MkIII)

User avatar
ermie571
Registered user
Posts: 4970
Joined: 11 Oct 2005, 11:11
80-90 Mem No: 2129
Location: Minster-on-Sea, Kent: Member 2129 07784052288

Post by ermie571 »

my 2lt air cooled (RIP, now in Aircooled heaven) started on gas, even with snow on the windscreen. A bit lumpy, but quickly warmed up. However, there will be others that will say their van never starts from cold on gas.

And for the last few months, the stabilizer unit was bypassed...so would appear that the unit was not necesary for gas. I belive the vapouriser has its own idle screw, which Steve will set for you!

regards
Emma
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG

User avatar
R0B
Moderator
Posts: 19455
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Post by R0B »

mine starts on petrol....

Gasure conversions start on gas
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

tootingblue
Registered user
Posts: 9
Joined: 05 Feb 2006, 21:10
80-90 Mem No: 2655
Location: Birmingham, UK 2655

Post by tootingblue »

thanks guys - all info much appreciated

User avatar
matt
Registered user
Posts: 7761
Joined: 09 Oct 2005, 18:37
80-90 Mem No: 397
Location: #Derbados

Post by matt »

"scratches head"

i'm 99% sure that most Aircooled buses on here by pass this
:)

User avatar
toomanytoys
Trader
Posts: 2870
Joined: 11 Oct 2005, 18:37
80-90 Mem No: 41
Location: Boston area, South Lincolnshire

Post by toomanytoys »

The idle stabilsers are a waste of space.. just get them to connect the plugs together (or the wires if its all abit scabby) and forget about the stabiliser unit.... the carbs are just a throttle to the LPG.. so when the LPG is sorted it will still run..

Locked