need a quick bit of info on lowering ..

Post by **quiksilver_jake** » 26 Jan 2006, 18:01

hi im just about to buy avo lowering springs but at the last min cant decide wheather to go for 60mm or 70mm lowering?im running 17 with low profile son front and larger rear tyres for aaz engine and 4 speed box (to lower revs) and help from people who no what they are on about! just dont no if with 70mm it will sit on the bump stops? or on 60 mm it wont be low enough and wasted 130 quid? cheers

Post by **ROBS T25** » 26 Jan 2006, 19:58

get in touch with JOKERDUB mate he knows wot needs to be known about lowering put a sout out for him on technical forum

Post by **TechtroT25** » 26 Jan 2006, 20:05

General feeling is that 70mm is to low because you can run out of adjustment when setting up the tracking etc and you should really run shorter shocks as the standard ones will be running on the end of their damping range i run a 60mm drop with shorter shocks and 16 inch rims with no problems also you will have to cut doen the bump stops .Have a word with Simon Baxter or Jokerdub hope this helps Stef

Post by **quiksilver_jake** » 26 Jan 2006, 21:07

they are off joker dub either v60 or 70 but im not sure and never can get hold of him

Post by **TechtroT25** » 26 Jan 2006, 21:27

Try giving him a shout on the brickyard

Post by **quiksilver_jake** » 27 Jan 2006, 20:52

sorted THREAD END

Post by **jokerdub** » 28 Jan 2006, 01:55

Post by **germman** » 30 Jan 2006, 22:52

http://www.muchos.co.uk/members/germman

Stick with 60mm kit ,looks good handels great !