I have been offerd an AEF 1.9 engine out of a 98 caddy van, heard it running and all sounds and looks great but its got drive by wire throttle on it and not cable so not made a decision on buying it yet until i checked on here if its a tricky swap or easy enough to work around.
I can pretty much have all parts needed off of the caddy to make it run and no rush to do so either so i assume accelerator pedal and wiring would be needed and ECU?
As an alternative is there a cabled throttle pump that would work to keep things simple or is there any way to rip drive by wire out and hard mod in a cabled setup?
Any help much appreciated so i can let the old guy know if i am buying it or off hunting a 1Y engine instead
CR to AEF with drive by wire, anything tricky with this swap
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 15
- Joined: 28 Jan 2010, 22:40
- 80-90 Mem No: 7865
- Location: somerset
Re: CR to AEF with drive by wire, anything tricky with this swap
this might be of help if not using ecu
http://www.brick-yard.co.uk/forum/topic ... tml#527511" onclick="window.open(this.href);return false;![OK! :ok](./images/smilies/ok.gif)
http://www.brick-yard.co.uk/forum/topic ... tml#527511" onclick="window.open(this.href);return false;
![OK! :ok](./images/smilies/ok.gif)
whitestar 19 n/a aef diesel
Re: CR to AEF with drive by wire, anything tricky with this swap
I have that link bookmarked from earlier which is a great help if the pump was normal but the one offered me is drive by wire so still a few odd bits to either workaround or swap over i guess.