Hopefully its only a minor problem but can anybody offer any advice or possible cause...??
My van is currently running an AAZ engine with the original AAZ diesel pump etc and the JX turbo / exhaust arrangement, the turbo was a rebuilt unit about 3 years ago....
Only recently, and it only seems to happen from cold until the engine has slightly warmed, each time i accelerate the is a whooshing noise coming from the engine, it seems to me like a 'pressure release valve' type of noise.
After are short time I cannot 'force' it to do it again by revving or otherwise, the van drives quite normal through the problem and after...
With my little knowledge to where it may be coming from I sort of suspect that vavle looking set on the end of the inlet manifold..??
I have checked around the manifold etc for any signs of leaks, split pipes etc and nothing can be seen, the turbo appears ok .
Am I waiting for a bigger problem to happen...new turbo or similar or is this a small problem with an easy repair or adjustment...
Any ideas welcome..
Thanks Keiron
Whats my van telling me...."Whooshing" noise..??
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 269
- Joined: 12 Oct 2005, 18:24
- 80-90 Mem No: 1052
- Location: Cape Town Sunny South Africa
Re: Whats my van telling me...."Whooshing" noise..??
Sounds like the blow off valve is opening. This is the black unit on the front side of your inlet manifold.
It is adjustable but should only be done by someone whos in the know and can check your boost pressure with a gauge.
Russel
It is adjustable but should only be done by someone whos in the know and can check your boost pressure with a gauge.
Russel
-
- Registered user
- Posts: 43
- Joined: 02 Jul 2007, 20:45
- 80-90 Mem No: 4778
- Location: Devon's Atlantic Coast...
Re: Whats my van telling me...."Whooshing" noise..??
Thanks Russel,
Would it be that this units faulty or out of spec. or could it be due to something else at fault..??
I've noticed this unit did not exist on the AAZ - can it be blocked off..?? - I was thinking that some day that I should get the AAZ inlet manifold reworked to fit the JX turbo etc set up, I would assume then it wouldn't exist..
Keiron
Would it be that this units faulty or out of spec. or could it be due to something else at fault..??
I've noticed this unit did not exist on the AAZ - can it be blocked off..?? - I was thinking that some day that I should get the AAZ inlet manifold reworked to fit the JX turbo etc set up, I would assume then it wouldn't exist..
Keiron