I'm trying to mount my 2001 Alh Tdi at an angle of 23.5 degrees in my syncro Doka.
a/ because I dont have to swap the petrol tank
b/ because it has a vnt turbo
c/probably numerous other reasons
d/the mounting holes are in the wrong place to use the standard diesel mounts
e/I can keep the larger clutch from the petrol engine
f/I can make up an adaptor plate to use the tdi starter
I have seen a front mounted support that will fit any Tdi, including the later pd engines on another convesion. It fits over the timing belt cover and allows the engine to be mounted on a new crossmember from behind rather than from underneath the sump
The part number is 038 199 207 J
Does anyone know what car this is off please, as I would rather find one down at the scrappy than pay out a wad to Mr Vw
tdi front engine support part number ?
Moderators: User administrators, Moderators
T25 Alternative engine Forum
HI found this hope it helps
AUDI A3 VW Golf IV Bora
Half way down page
http://321autoteile.de/index.php?cPath= ... d101de6d59
AUDI A3 VW Golf IV Bora
Half way down page
http://321autoteile.de/index.php?cPath= ... d101de6d59