Handbrake cable part deux

[drzed1980]

Do i need to remove the fuel tank to change the handbrake cable?

both ends are loose but i cannot get the cable to pass through the top of the fuel tank

cheers

mat

[Aidan]

there's a cunning rubber mount clamped to the chassis above the fuel tank on a 2wd is a T of a job, iirc it's a push fit so you need to be able to put downward force on the cable to release it, not sure if you can do it with tank in place; one of the few jobs that's easier on a syncro as fuel tank is at rear so you can get at the mount; if you get a new cable from Brickwerks you may have to transfer the rubber bit from the old one
http://www.brickwerks.co.uk/shop?page=s ... hand+brake

[drzed1980]

thank you for the advice