Where can i get these bolts / screws?

[bmouthboyo]

Hello i bet your sick of me now lol,

I have removed the dash and need to replace a number of screws and bolts but have no idea as to the dimensions of some or where i can get replacements?

If you could post links or info on these id be ever so grateful

I need:

2 Replacement bolts for the rounded bolts on the steering column
2 Philip head bolts that attach to the top of the wiper assembly on the top side rear of the dash
4 Large Philip bolts that the heater assembly to the front bulkhead

Thanks

[Fritz]

All the bolts and screws can be substituted for set screws, for example the column bolts can be changed for 8mm set screws rather than shear bolts.

Your local hard wear store should have these on the shelves OR B+Q/ Homebase or any Focus superstore.


Regards


Fritz,,,,,,,,,,

[Grumpy Midget]

All the bolts and screws can be substituted for set screws, for example the column bolts can be changed for 8mm set screws rather than shear bolts.

Your local hard wear store should have these on the shelves OR B+Q/ Homebase or any Focus superstore.


Regards


Fritz,,,,,,,,,,

As Fritzzzzzzzzz says but the sizes are 8x1.25 @25cms long
as for your dash they all will fit with reference to L/H R/H drive. The one you have bought on Flea/Bay will fit but your original seams to have more dash fascia cutouts, Just cutout to fit what ever auxhilaries you have. also do some research like looking in HERE--heres the wiki http://wiki.club8090.co.uk/index.php/Inter" onclick="window.open(this.href);return false; ... rd_removal--------------------------

[bmouthboyo]

ok thanks for advice guys.

I am a little confused on the screws though, is 8 x 1.25 just a M8 bolt?

http://www.screwfix.com/prods/31880/Bol ... Pack-of-10" onclick="window.open(this.href);return false;

I cant find the 1.25 listed anywhere, i assume thats the distance of a full circle on the thread?

Also is there a reference for the different bolt/screw sizes? My Haynes manual doesn't seem to mention them.

I need replacements for the heater housing to bulkhead and the top Philip bolts that hold the wiper assembly to the underside front area of the dash.

[Ian Hulley]

1.25 is the pitch ... M8x1.25 is the 'standard' off-the-shelf M8 thread.

see here for info ... http://en.wikipedia.org/wiki/ISO_metric_screw_thread

I spend much of my time at werk wielding the top one of these ...

Ian.