Page 1 of 1
Alloy wheels
Posted: 18 Feb 2011, 21:19
by jimmcgregor
Are audi alloy wheels ok to fit on my bus, How much modifying does it require to get them on? The pcd is right but dont know much about offset and bore size, Can anyone help with this?
Re: Alloy wheels
Posted: 19 Feb 2011, 23:12
by scoobydrew
Hi,
Try looking here.
http://wiki.club8090.co.uk/index.php/Wh ... ive_wheels
The WIKI at the top of the forum page is a good knowledge for all stuff.
Andy
Re: Alloy wheels
Posted: 22 Feb 2011, 23:17
by Cruz
jimmcgregor wrote: How much modifying does it require to get them on?
useable offset on the wheels
Correct wheel pcd
Correct bolt hole diameter
Correct wheel centre bore
Spacers to correct the offset and clear any suspension issues
Longer bolts/studs (studs need pressing out of the rear hubs and new ones pressing in)
Tapered or radius seat nuts/bolts
Correct sized tyres to keep the rolling radius the same as well as adequately rated tyres
etc etc etc
Or spend ££££££ of the ugly-ish original spec multivan alloys