112 pcd

All things round and their alignment to your direction of travel

Moderators: User administrators, Moderators

Locked
dave lfc
Registered user
Posts: 372
Joined: 27 Nov 2010, 12:14
80-90 Mem No: 9021
Location: liverpool

112 pcd

Post by dave lfc »

hi everyone i am in the process of buying a few bits for my van that i havent bought yet anyway i know someone who has wheels forsale and he said they are 112 pcd and they are off an audi but he dosent know which model.how do i check the gap between holes on the wheels,thanks dave
its better to burn out than to fade away 1.9 dg petrol transporter1988

jason k
Registered user
Posts: 938
Joined: 13 Nov 2005, 09:35
80-90 Mem No: 1959
Location: aberdare south wales

Re: 112 pcd

Post by jason k »

its normally stamped but if the wheels are audi they will normally need the center bore enlarging to fit the front wheels.......
98 Westfalia James Cook

futbus
Trader
Posts: 498
Joined: 18 Oct 2005, 16:25
80-90 Mem No: 1266
Location: South Devon
Contact:

Re: 112 pcd

Post by futbus »

112 mm pcd will fit the van, but the center bore and ET will have to checked to see if they will fit.

Use the search facility on the site as there has been plenty of information threads about what fits and doesn`t.

dave lfc
Registered user
Posts: 372
Joined: 27 Nov 2010, 12:14
80-90 Mem No: 9021
Location: liverpool

Re: 112 pcd

Post by dave lfc »

they are off an audi tt 10 plate if thats any use,will these have to be modded to fit,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988

dave lfc
Registered user
Posts: 372
Joined: 27 Nov 2010, 12:14
80-90 Mem No: 9021
Location: liverpool

audi tt wheels

Post by dave lfc »

hi put this up yesterday to see if these would fit a t25,the pcd is 112 and here is abit more infomation about the wheels that i have found out.offset is 42 to 50 and the bore is 57.1 will these fit or will i need spacers or anything else.please bear with me as i am new to all this and i want to get bits in for my van while i can,thanks dave
its better to burn out than to fade away 1.9 dg petrol transporter1988

User avatar
cygnak
Registered user
Posts: 195
Joined: 10 May 2009, 21:55
80-90 Mem No: 6770
Location: huddersfield

Re: 112 pcd

Post by cygnak »

Came across this yesterday, it might help a bit.
http://www.alloyguide.com/Audi.php
they say TT's are 100pcd not 112pcd
Simon and Nicola
Syncro Westfalia 1.9 DG LPG converted

User avatar
andisnewsyncro
Registered user
Posts: 1074
Joined: 27 Jan 2007, 17:43
80-90 Mem No: 3311
Location: Retford. North Nottinghamshire

Re: audi tt wheels

Post by andisnewsyncro »

Pretty much all you need to know is here in the wiki http://wiki.club8090.co.uk/index.php/Wh ... ive_wheels or have a look at the wheels thread on Brickyard.

These would need the centres boring out & spacers to bring down the offset. Don't forget longer studs and properly rated tyres.
What a long strange trip it's been

dave lfc
Registered user
Posts: 372
Joined: 27 Nov 2010, 12:14
80-90 Mem No: 9021
Location: liverpool

Re: audi tt wheels

Post by dave lfc »

thanks for that,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988

Locked