brms and lowering

All things round and their alignment to your direction of travel

Moderators: User administrators, Moderators

Locked
frankthet25
Registered user
Posts: 1
Joined: 07 Jul 2010, 10:35
80-90 Mem No: 0

brms and lowering

Post by frankthet25 »

Have recently lowered my van 60mm and gone for 15 in Brms with 185, 15 inch vanco continental commercially rated tyres!! Looks great.

Went for a spin last night and got flashed by an AA van as he thought the rear wheels were coming off. Checked the torques all fine, however the rear wheels have got extreme excessive play which looks from top to bottom and makes thw wheels look completely warped, jacked rear up and tried to move the wheel - no play?

Really confused as VW Heritage assured me these wheels fit straight onto a t25, clearly they don't!!, really annoyed as just want to go camping and due to works the van has been off the road for the last 4 weekends

New radiator, thermostat and coolant change,
new lowering kit, shocks & springs,
Replaced all fuel lines & checked tank
Changed anti rollbar bushes all

Just want to go camping, can anyone explain why the rear wheels look like their about to fly off?

And no sarcastic comments please!! I like the BRM's think they look great and had already splashed out £400 on them before everyone started saying they are crap!

cheers
Steve

User avatar
andisnewsyncro
Registered user
Posts: 1074
Joined: 27 Jan 2007, 17:43
80-90 Mem No: 3311
Location: Retford. North Nottinghamshire

Re: brms and lowering

Post by andisnewsyncro »

There's a couple of bolts to take off the rear drums when fitting aftermarket wheels without the recesses for them to fit in. If you've left them in it will mean the wheels won't fit flush.
What a long strange trip it's been

silverbullet
Trader
Posts: 16302
Joined: 08 Jun 2009, 09:51
80-90 Mem No: 6908
Location: Surrey Syncronaut #156
Contact:

Re: brms and lowering

Post by silverbullet »

This basic info should be in the wheel section of the wiki. Unfortunately a lot of "specialists" say that things will fit, when the truth of it is they will only do so with further work.
Wheel swaps are the most common modification and quite possibly the least well understood. Doing your homework is essential if you want to avoid a really nasty accident that your insurers won't entertain.
P.S. Didn't your wonky wheels shake the bus like a spin cycle? (ask a bored housewife)

frankthet25
Registered user
Posts: 1
Joined: 07 Jul 2010, 10:35
80-90 Mem No: 0

Re: brms and lowering

Post by frankthet25 »

thanks for the replies I will check that bolts are removed, also the van didn't shake at all bizarrely, it drives extremely well, one owner and only 70K since new, and it didn't feel any different.

Thanks for the replies

User avatar
ricicles
Registered user
Posts: 934
Joined: 16 Mar 2008, 17:47
80-90 Mem No: 6350
Location: wymondham

Re: brms and lowering

Post by ricicles »

is it the negative camber that you get when you lower the van that is worrying you, ie the wheels stick out a bit at the bottom?
did you do the suspension work yourself? if not take it back to the garage that did it for you and have them check it., if you did it then make sure to set the tracking and camber, if you do not you will wear your tyres away at an alarming rate and your bus will be a danger to yourself and everybody around you. also your wheels are the wrong offset, these guys have been told before but continue to sell them.

harris121163
Registered user
Posts: 323
Joined: 28 Apr 2009, 20:20
80-90 Mem No: 3614
Location: eyemouth scotland

Re: brms and lowering

Post by harris121163 »

hi i also fitted 15 inch brm,s and went up the road for spin and got flagged down by a passing motorist telling me my rear wheels were falling off. i worked it out about the drum bolts but i think there should be more info about this issue. once sosted i am well chuffed with them.

User avatar
andisnewsyncro
Registered user
Posts: 1074
Joined: 27 Jan 2007, 17:43
80-90 Mem No: 3311
Location: Retford. North Nottinghamshire

Re: brms and lowering

Post by andisnewsyncro »

It's at the very top of the WIKI page; Wheels and tyres - Alternative wheels

"NB. Warning... When fitting alternative wheels at the rear, please note that unless they are recessed for the two small drum locating set screws, then they will need to be removed so the wheel can be pulled up flush and flat to the drum surface. "

http://wiki.club8090.co.uk/index.php/Wh ... ive_wheels

and in a lot of posts aout how to fit / will these fit etc.. It should be apparent when you try and the wheels though, I would have thought to be honest



It's more of a problem that so called "specialists" list non suitable wheels as "bolt on replacements" for these vans
What a long strange trip it's been

Locked