16" Audi A3 Wheels
Moderators: User administrators, Moderators
-
mearnsy
- Registered user
- Posts: 201
- Joined: 19 Mar 2007, 23:04
- 80-90 Mem No: 3513
- Location: Shanklin, Isle of Wight
16" Audi A3 Wheels
Hi will these fit on a t25? If so do they need spacers or boring out etc?
Lettering, signage and brand solutions. Faceup - 07929 033 713
-
poshbuggers
- Registered user
- Posts: 1352
- Joined: 23 Oct 2005, 19:15
- 80-90 Mem No: 0
- Location: Nottinghamshire
Re: 16" Audi A3 Wheels
Depends on the age of them. Early A3's were 5x100 (same as some Golfs) and won't directly fit a T3. Later models went to 5x112.
'90 Syncro Hightop. Ex-BUPA/Rowan ambulance with 2.0L GTI power and some curious windows.
)
-
spet25
- Registered user
- Posts: 9
- Joined: 25 Feb 2008, 18:44
- 80-90 Mem No: 4803
- Location: Denton, Manchester
Re: 16" Audi A3 Wheels
I have A3 on mine, There need boring out on the front and spacers front and rear.
-
mearnsy
- Registered user
- Posts: 201
- Joined: 19 Mar 2007, 23:04
- 80-90 Mem No: 3513
- Location: Shanklin, Isle of Wight
Re: 16" Audi A3 Wheels
spet25 wrote:I have A3 on mine, There need boring out on the front and spacers front and rear.
is that a costly job to have them bored out?
Lettering, signage and brand solutions. Faceup - 07929 033 713
-
spet25
- Registered user
- Posts: 9
- Joined: 25 Feb 2008, 18:44
- 80-90 Mem No: 4803
- Location: Denton, Manchester
Re: 16" Audi A3 Wheels
If I'd of known the hassle when I started I wouldn't off done it. Boring larger holes was the small part getting the rear hub nuts off was a ball ache. I had to hire an impact drive as a scaffold pole wouldn't move them. Then getting longer studs pressed in. Longer bolts on the front also. Unless your desperate then look for easier ones. I think you can get easier to fit alloys