Hi all looking for some advice iv got a set of 15"steel wheels off mt T4 just wondering how much work would it be to get them to fit on to my 14" syncro as i fancy putting bigger wheels on
any advice would be greatful
15" T4 steel wheels
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 71
- Joined: 11 Jul 2009, 20:59
- 80-90 Mem No: 0
- Location: BRECON BEACONS
-
- Registered user
- Posts: 71
- Joined: 11 Jul 2009, 20:59
- 80-90 Mem No: 0
- Location: BRECON BEACONS
Re: 15" T4 steel wheels
ANYONE
- jebiga41
- Trader
- Posts: 717
- Joined: 15 Mar 2008, 15:50
- 80-90 Mem No: 5654
- Location: dublin ireland
- Contact:
Re: 15" T4 steel wheels
think you have to enlarge the hole for the hub try looking on brickyard or even ask in the syncro section
VW T3/T25 and Syncro Gearbox rebuilds
http://vantopia.ie
http://vantopia.ie
-
- Registered user
- Posts: 424
- Joined: 10 Oct 2005, 18:51
- 80-90 Mem No: 1053
- Location: Ross-on-Wye
Re: 15" T4 steel wheels
Nathan, the centre boss will require machining to accommodate the larger T25 diameter - 66.5mm I think.
The PCD is the same 5/112.
The ET, wheel offset, is too big - T4 is about 55 as far as I can recall , T25 about 35 so a 20mm adapter is required.
However, I found that if you fit an adapter you may not need to the machine the boss diameter!
Have you read this.....
http://www.brick-yard.co.uk/forum/defin ... c1290.html" onclick="window.open(this.href);return false;
Doug
PS Ian, at Syncro-nutz, had a pile of 15in rims that had been machined to fit the T25 with the correct ET , may be cheaper to buy a set of rims from him.
PPS Alternatively have a look at http://www.kinkymicks.com/products.php?cPath=4" onclick="window.open(this.href);return false; although they may not be listed I'm sure he can get the adapter you need, that is 5/112 to 5/112, thickness is 23mm I think. I've had a couple of sets from him.
The PCD is the same 5/112.
The ET, wheel offset, is too big - T4 is about 55 as far as I can recall , T25 about 35 so a 20mm adapter is required.
However, I found that if you fit an adapter you may not need to the machine the boss diameter!
Have you read this.....
http://www.brick-yard.co.uk/forum/defin ... c1290.html" onclick="window.open(this.href);return false;
Doug
PS Ian, at Syncro-nutz, had a pile of 15in rims that had been machined to fit the T25 with the correct ET , may be cheaper to buy a set of rims from him.
PPS Alternatively have a look at http://www.kinkymicks.com/products.php?cPath=4" onclick="window.open(this.href);return false; although they may not be listed I'm sure he can get the adapter you need, that is 5/112 to 5/112, thickness is 23mm I think. I've had a couple of sets from him.
80-90: 1053
Syncronauts: 15
T3 Syncro DOKA (makeover nearly finished)
T4 Syncro LWB Panel Van - now departed
T3 Syncro SIKA - deciding whether it's for the chop or worth saving
Syncronauts: 15
T3 Syncro DOKA (makeover nearly finished)
T4 Syncro LWB Panel Van - now departed
T3 Syncro SIKA - deciding whether it's for the chop or worth saving
-
- Registered user
- Posts: 71
- Joined: 11 Jul 2009, 20:59
- 80-90 Mem No: 0
- Location: BRECON BEACONS
Re: 15" T4 steel wheels
Hi Doug thanx for that do you think it ll be to much hassel to both doing or shall i just continue to use the original 14" steels cause im not to sure how easy it is to get some AT tyres for 14" wheels
-
- Registered user
- Posts: 424
- Joined: 10 Oct 2005, 18:51
- 80-90 Mem No: 1053
- Location: Ross-on-Wye
Re: 15" T4 steel wheels
You'll have more choice with a 15in rim although I think BFG ATs may still be available in 14in - I believe this topic has been raised a few times so it might be worth doing a search of the forum for additional information
80-90: 1053
Syncronauts: 15
T3 Syncro DOKA (makeover nearly finished)
T4 Syncro LWB Panel Van - now departed
T3 Syncro SIKA - deciding whether it's for the chop or worth saving
Syncronauts: 15
T3 Syncro DOKA (makeover nearly finished)
T4 Syncro LWB Panel Van - now departed
T3 Syncro SIKA - deciding whether it's for the chop or worth saving
-
- Registered user
- Posts: 71
- Joined: 11 Jul 2009, 20:59
- 80-90 Mem No: 0
- Location: BRECON BEACONS
Re: 15" T4 steel wheels
Yr iv done a quick search but there does nt seem to be any definate answers for it my aunty owns a tyre fitting form in Brecon so i might give thema ring today and see what they can get in stock thank you for yr relpys ill let you know how i get on
-
- Registered user
- Posts: 144
- Joined: 07 Nov 2008, 21:50
- 80-90 Mem No: 7450
- Location: Turnip field just north o york
Re: 15" T4 steel wheels
aarrgh! boring out centres of t4 steelies, nah, no thankyou, too risky, just get 15 or 16" mercs and be done with it, no centre boring needed, offset suitable, pcd good, price- cheeeap used
HOW MUCH!
1987 1.9tdi pug powered twin slider velle
1987 1.9tdi pug powered twin slider velle