hi, i've just brought a nice set of audi A3 alloys the stud holes need boring out. does anyone no where i can get this done in the midlands area, as close to Evesham/Stratford as possible. if anyone has any idea how much this would roughly cost that would be helpful too.
thanks Rich
alloys bored in the midlands
Moderators: User administrators, Moderators
-
richardprint
- Registered user
- Posts: 30
- Joined: 17 Feb 2009, 18:56
- 80-90 Mem No: 6416
- Location: Nr Evesham
-
Fritz
- Registered user
- Posts: 1627
- Joined: 17 Jul 2006, 22:51
- 80-90 Mem No: 380
- Location: Ormskirk, Lancashire
Re: alloys bored in the midlands
Have you tried 'Googling' engineering services in the Evesham area,,,,,,,I have and found quite a few to go at....
Regards
Fritz,,,,,,,,,,,,,
Regards
Fritz,,,,,,,,,,,,,
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
-
richardprint
- Registered user
- Posts: 30
- Joined: 17 Feb 2009, 18:56
- 80-90 Mem No: 6416
- Location: Nr Evesham
Re: alloys bored in the midlands
ok mate, thanks for the suggestion i tried googling before but was unsure as to what to be searching.
cheers
cheers