alloy width?
Moderators: User administrators, Moderators
-
BIG D
- Registered user
- Posts: 47
- Joined: 21 Jan 2008, 18:55
- 80-90 Mem No: 0
- Location: oswestry,shropshire
alloy width?
ive been looking at the mercedes alloys found some pcd =112 5 stud and the offset is 35 the width of the wheel with tyre on is 9" is this way to big to get past sliding door if so does anyone no maximum width,thanks dave
seer g60 steves reply here..http://forum.club8090.co.uk/viewtopic.php?t=30269
the width of the wheel with tyre on is 9" is this way to big
2.1 LPG/Petrol Auto Caravelle
"The difference between genius and stupidity is that genius has its limits"
"The difference between genius and stupidity is that genius has its limits"
-
rab-rulez
- Registered user
- Posts: 4
- Joined: 02 May 2007, 00:07
- 80-90 Mem No: 4523
- Location: AYR SCOTLAND
wheel width
i am curently running on et 35 wheels that are 9 " wide with 245 40 18 tyres on with a 18mm spacer and my door just touches the tyre. although my current slider is rotten at the bottom and lyes a bit further in than normal. im awaiting delivery of 2 10" rears et 15 im hopeing these bolt on with no spacers if i need to i will do it . i can get you custom spacers made if you need any. strange widths not a problem can also get hold of staggered width alloy wheels hope this helps you out
I WILL GET THERE IN THE END