Will porsche cookie cutter wheels fit a type 25

Post by **DING DONG** » 09 Jan 2008, 16:20

Will porsche cookie cutter wheels fit a type 25 and if so what is needed to make them fit.

Post by **jason k** » 09 Jan 2008, 18:05

you will need adaptors as porsch whels are 5 x 130 stud and vw are 5 x 112
try
www.t3tuning.co.uk for the adators

Post by **big red bus** » 09 Jan 2008, 21:14

got porsche 928 wheels on my van. you need wheel adaptors, also i had to fit 5mm spacers on the front as the wheels are wider than standard t25 rims and the wheels were fouling the top arms. Also had to fit extended wheels bolts. had to modify wheel spacers as centre hub is different size to porsche wheel. took abit of work but please with results.

Post by **jason k** » 09 Jan 2008, 22:11

928 slots are a lot harder to fit than some porsche wheels!!
the adaptors fron t3 tuning come with a stud conversion and are available in varying thicknesses to do away with spacers.
its worth speaking to charlie from t3 on this.

Post by **Fritz** » 09 Jan 2008, 22:33

Oh Yes,,,,,,,,,They do go on a T25 , but if cheap adapters are used some extra work will be needed to get everything to fit as it should.

Heres how they look once the buggering about has been done,,,,,,

[IMG

825]http://i13.photobucket.com/albums/a292/ ... etfest.jpg[/img]

Regards

Fritz,,,,,,,,