I have been told ford granada scorpio alloys fit a t25. wheels are 6.5j 16" not sure of the offset . will they fit? will i need spacers longer bolts/studs.
thanks stephen
ford granada scorpio alloys, will they fit my 85 wedge
Moderators: User administrators, Moderators
ford granada scorpio alloys, will they fit my 85 wedge
dont play stupid with me.............i'm better at it
MEMBER 4049
MEMBER 4049
-
- Registered user
- Posts: 1672
- Joined: 12 Oct 2005, 11:14
- 80-90 Mem No: 1342
- Location: Wolverhampton.
They will go on if you remove the 'lip' that holds the original wheel centre on (this is to clear the front hubs), longer studs/bolts will be required, no spacers but beware the boltholes are quite big so there is a risk of the nuts 'pulling through' so you need to consider this.
I have fitted 2 sets in the past so feel free to call me. 07976 273285.
I have fitted 2 sets in the past so feel free to call me. 07976 273285.
2.1 DJ running on carb and LPG.
-
- Registered user
- Posts: 602
- Joined: 06 Nov 2006, 18:12
- 80-90 Mem No: 3096
- Location: Bristol. 1985 1.9 Devon Pop Top (L.P.G)
Yes they fit straight on (I have them on mine) and you dont really need the longer studs, but you do need the shims to stop bolts from pulling through. You can get these from fireturk...here or on ebay.
Sherlock.
[IMG:75:100]http://i216.photobucket.com/albums/cc91 ... 9117-2.gif[/img] Remember the 7 Ps......Prior Planning & Preperation Prevents Pi$$ Poor performance.
[IMG:75:100]http://i216.photobucket.com/albums/cc91 ... 9117-2.gif[/img] Remember the 7 Ps......Prior Planning & Preperation Prevents Pi$$ Poor performance.
ford granada scorpio alloys, will they fit my 85 wedge
I have a set but only have the fronts on fitted with longer bolts with the correct ford taper bolt.
As for the back studs, How much of the stud is showing to allow you to use standard studs?
As for the back studs, How much of the stud is showing to allow you to use standard studs?