Club 80-90 Forums

Installation guide shows it mounted horizontally
this shows a right angle bracket that looks like it could be mounted vertically, its also vertical in the pic
http://www.propexheatsource.co.uk/heate ... hs2000-kit" onclick="window.open(this.href);return false;

anybody know?

Read the faq's :

Q. Can the heater be mounted vertically?

A. The heater must not be mounted vertically on its nose or end or upside down but on one of its sides is not a problem. Remember when mounting the unit you should ensure you can still maintain access to the electronics cover and gas connections
FAQ Type: HS2000, HS2000E, HS2211, HS2800. Heaters: HS2000 HS2000E HS2211 HS2800

Thanks obg,

you might expect that in the install guide
i wonder if at an angle is ok?
im thinking of the sloping floor above the gearbox?

I must admit the fitting instructions are abysmal compared to Eberspächer's and Webasto's. Seems like horizontal at 45 degrees/whatever will be fine.

Cheers obg