About to start refit....

The Tardis factor (interiors , awnings, roofs etc)

Moderators: User administrators, Moderators

Locked
User avatar
Fisch
Registered user
Posts: 5
Joined: 07 Jul 2013, 07:47
80-90 Mem No: 12549
Location: Crewe, Cheshire

About to start refit....

Post by Fisch »

I have a Holdsworth Vision (1.9 petrol, 1988) and while the interior cupboards, seats etc are in good state I am looking at removing them, redesigning the interior totally, full width rock n roller, perhaps small 'camper' unit. Aim is 6 months and budget of £750 (without the new unit). All work to be done by myself.

Okay where to start - taking out the old units...... is there any sequence to make this easier. Don't just want to rip them out as hopefully someone will still love them. Fridge works, grill and burners are fine, sink clean but pump broken for water. Even the 'room' divider is still intact and works perfectly.

Suggestions???

Many thanks,

Pete
1989 Holdsworth Vision, 1.9 petrol.

User avatar
1664
Registered user
Posts: 8747
Joined: 30 Mar 2006, 15:20
80-90 Mem No: 3299
Location: Coventry Member

Re: About to start refit....

Post by 1664 »

Start at the tailgate and work towards the front leaving the kitchen area till last.
Vorsprung Durch Technik my ar$e!

User avatar
Fisch
Registered user
Posts: 5
Joined: 07 Jul 2013, 07:47
80-90 Mem No: 12549
Location: Crewe, Cheshire

Re: About to start refit....

Post by Fisch »

Thanks, will photograph progress... however slow I am....
1989 Holdsworth Vision, 1.9 petrol.

User avatar
Fisch
Registered user
Posts: 5
Joined: 07 Jul 2013, 07:47
80-90 Mem No: 12549
Location: Crewe, Cheshire

Re: About to start refit....

Post by Fisch »

Thanks, will photograph progress... however slow I am....
1989 Holdsworth Vision, 1.9 petrol.

Plasticman
Trader
Posts: 8047
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: About to start refit....

Post by Plasticman »

good work , sod timescale but take picks as it is now and document it through
mm :ok

Locked