problems fitting exhaust flue on new instalation

The Tardis factor (interiors , awnings, roofs etc)

Moderators: User administrators, Moderators

User avatar
fairwynds
Registered user
Posts: 749
Joined: 22 Jan 2007, 23:52
80-90 Mem No: 3288
Location: West Sussex

Re: problems fitting exhaust flue on new instalation

Post by fairwynds »

Gary.pb wrote:Would something like this be suitable

http://www.ebay.co.uk/itm/Alloy-Alumini ... 43ace0d052" onclick="window.open(this.href);return false;

To be honest I don't know how hot fridges run at.
The ad states that it is heat resistant but would that be sufficient or would I need something more substantial?

Put it this way, you wouldnt be able to touch it....so that rating of +85c is not going to do the job. That's marketed as 'air ducting', there must be something available with a bit more clout suitable for exhaust gas... try the Dometic website? [runs off to take a peek himself....]
FW
1.9 DG Bilbos 'Arragon' Hitop LPG'd by Gasure
1.9 TDi Golf Mk4 Estate
Member no 3288

User avatar
fairwynds
Registered user
Posts: 749
Joined: 22 Jan 2007, 23:52
80-90 Mem No: 3288
Location: West Sussex

Re: problems fitting exhaust flue on new instalation

Post by fairwynds »

This stuff, but in the right diameter:

http://www.ebay.co.uk/itm/ALUMINIUM-ALL ... 53fbabf1a2" onclick="window.open(this.href);return false;
1.9 DG Bilbos 'Arragon' Hitop LPG'd by Gasure
1.9 TDi Golf Mk4 Estate
Member no 3288

User avatar
1664
Registered user
Posts: 8747
Joined: 30 Mar 2006, 15:20
80-90 Mem No: 3299
Location: Coventry Member

Re: problems fitting exhaust flue on new instalation

Post by 1664 »

Gary.pb wrote:out of interest how did you get the flexible pipe out the van. Im assuming it is joined to a riged straight section just before it goes through the panel?
I didn't get it out of the van, I left it attached. The fridge and furniture was removed so I could attack some seam rot. You can see it just hanging in this picture.

Image
Vorsprung Durch Technik my ar$e!

Plasticman
Trader
Posts: 8047
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: problems fitting exhaust flue on new instalation

Post by Plasticman »

get loads of it from http://www.olearymotorhomes.co.uk/index ... ion=search" onclick="window.open(this.href);return false;
most diameters
mm

Locked