Quick Eberspacher fitting question

Post by **Winchweight** » 15 Nov 2013, 18:42

Quick question, what size reducers needed to splice into a T25 fuel line to fit an Eberspacher D2?

Post by **ninja.turtle007** » 15 Nov 2013, 20:28

Winchweight wrote:Quick question, what size reducers needed to splice into a T25 fuel line to fit an Eberspacher D2?

I fitted the T piece just after the fuel filter. I'm not 100% but 7mm equal T springs to mind.

Post by **ELVIS** » 15 Nov 2013, 23:57

8mm on the exit/entry points where its cut/put into fuel line. The Leg of the T that is at 90' to these two is 4mm

Post by **Winchweight** » 16 Nov 2013, 08:39

Thanks guys. Mario did tell me but Alzheimer's kicked in before I got home.

Post by **lloydy** » 16 Nov 2013, 13:37

I cut mine in right by the outlet from the fuel tank, pump fitted quite close to it on the inner chassis member

Post by **Winchweight** » 16 Nov 2013, 13:47

Thanks mate. I expect that's where Mario will put it too.

Club 80-90 Forums