Replacement Fiamma ends?

[danmetallic]

Does anyone know if you can easily get new ends for a Fiamma 45 Deluxe? The couriers have just broken the end of one I bought in the for sale section

[ninja.turtle007]

Fiamma have most parts available. Have a look of their website for the exploded diagrams for the part numbers.

[danmetallic]

Great stuff. I'll take a look. Was worried that as it's an older model I might not be able to get the parts.

[Daisy]

Try here http://www.fiammastore.com/Fiamma-Awnin ... nd-caravan

[Cruz]

the12voltshop sell them too

E D I T: Only awning I can find with a hex bolt on the end is the F45 Elegance XL L with was 4m long and above (I'd assume all that is different is the main awning and the caps are just the same for shorter awnings)

Cap number is 02595-01



And it's £15.26 + postage at Fiamma

http://www.thefiammacentre.co.uk/magent ... 45-4m.html" onclick="window.open(this.href);return false;

£13.78+post at 12voltshop

http://www.the12voltshop.co.uk/Shop/025 ... 45-4m.html" onclick="window.open(this.href);return false;

Also there's an endcap to cover the hexbolt if you are missing that too



http://www.the12voltshop.co.uk/Shop/986 ... ce-4m.html" onclick="window.open(this.href);return false;
http://www.thefiammacentre.co.uk/magent ... ce-4m.html" onclick="window.open(this.href);return false;

[danmetallic]

I'm been off the forum for a week or so... Thanks for the tips! Discovered the same ones as the posts above and bought the lot in the hope one of them will fit. Unfortunately it seems Fiamma changed the height and fitting every bl@@dy time. Might have to get something made up if none of these work. Thanks again!

[danmetallic]

Having a lot of trouble tracking one down. The full title is Fiamma F45 Deluxe S which apparently they only made for 6 months. Manage to find an exploded view on a French site as well as an old one someone was selling on fleabay.

[danmetallic]

Seems I might have lucked out with part 02771-01 originally made for the F45 Plus / Elegance. Will have to drill a hole through the end though for the bolt that holds the material rod. Fingers crossed I don't break the plastic.

[danmetallic]

Finally got it to work with an adapted end of an Fiamma Elegance.