Sliding door trim - Where can i get one?

The Tardis factor (interiors , awnings, roofs etc)

Moderators: User administrators, Moderators

Locked
Oh Danny Boy
Registered user
Posts: 14
Joined: 12 Aug 2011, 12:29
80-90 Mem No: 0
Location: Milton Keynes

Sliding door trim - Where can i get one?

Post by Oh Danny Boy »

Anyone know of anywhere i can get a sliding door trim?. I know Vanwurks do them, but their 2 options are not suitable for my floor depth. Any pointers appreciated.

Thanks

User avatar
kevtherev
Registered user
Posts: 18830
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: Sliding door trim - Where can i get one?

Post by kevtherev »

Can you expand on your description " door trim"

is it the door card trim, the window seal, the door seal.
AGG 2.0L 8V. (Golf GTi MkIII)

ambibus
Registered user
Posts: 65
Joined: 08 Aug 2010, 19:29

Re: Sliding door trim - Where can i get one?

Post by ambibus »

Hi danny boy

wickes do a checker plate 90 degree profile about an inch and a half, possibly 2 inch each profile if you know what I mean. planning on doing my door trim with that.

hope this helps I'm sure it will show a picture on thier web site.

Paul

Oh Danny Boy
Registered user
Posts: 14
Joined: 12 Aug 2011, 12:29
80-90 Mem No: 0
Location: Milton Keynes

Re: Sliding door trim - Where can i get one?

Post by Oh Danny Boy »

Paul,
Thanks for the heads-up - i'll check that out. :ok

Kev,
What i mean is this: http://www.vanwurks.co.uk/stainless-ste ... floor.html" onclick="window.open(this.href);return false;

User avatar
kevtherev
Registered user
Posts: 18830
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: Sliding door trim - Where can i get one?

Post by kevtherev »

ah I see.

I used stair nosing from B & Q
AGG 2.0L 8V. (Golf GTi MkIII)

Oh Danny Boy
Registered user
Posts: 14
Joined: 12 Aug 2011, 12:29
80-90 Mem No: 0
Location: Milton Keynes

Re: Sliding door trim - Where can i get one?

Post by Oh Danny Boy »

After looking at what's available, I think i'm just going to have to repaint the one i have. My floor is cut to the curve of the sliding door rail(?) if that makes sense (as opposed to straight across), so i can't use an "L" shaped angle - I need one to curve with my floor. I guess they are out there somewhere, because my van already has one, i just can't find one myself.
Thanks anyway,

Cruz
Registered user
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Re: Sliding door trim - Where can i get one?

Post by Cruz »

Ebay. They appear regularly

pieman1
Registered user
Posts: 67
Joined: 22 Jul 2009, 10:08
80-90 Mem No: 8418
Location: barrow

Re: Sliding door trim - Where can i get one?

Post by pieman1 »

hi do you not have a local sheet metal shop/firm that can knock one up for you...its not a big job

Locked