Hi All
Apologies if this seems simple to some, but...
Why does the pressure warning LED light up when the ignition is first turned to position2, and then go out immediately?
It doesn't light up again....
Thanks
Oil pressure warning LED operation.....
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 185
- Joined: 14 Apr 2014, 21:50
- 80-90 Mem No: 13518
Oil pressure warning LED operation.....
1990 Atlantic 2.1 SS
1996 Lotus Esprit S4s
1996 Lotus Esprit S4s
- wee bugger
- Registered user
- Posts: 545
- Joined: 30 Dec 2006, 07:31
- 80-90 Mem No: 3238
- Location: Glasgow
- Contact:
Re: Oil pressure warning LED operation.....
it'll normally stay on for a few seconds to show its working as the engine starts, goes out and should only come back on if your pressure drops...
-
- Registered user
- Posts: 185
- Joined: 14 Apr 2014, 21:50
- 80-90 Mem No: 13518
Re: Oil pressure warning LED operation.....
Thanks
Somethings amis then, as it goes out even before the engine is turned.
There seems to be a myriad of coloured switches, white, black, grey and blue
I've never heard the buzzer sound for the high pressure, any ideas which 2 should be fitted as standard for an imported 1990 Atlantic 2.1 Digifant?
Thanks
Somethings amis then, as it goes out even before the engine is turned.
There seems to be a myriad of coloured switches, white, black, grey and blue
I've never heard the buzzer sound for the high pressure, any ideas which 2 should be fitted as standard for an imported 1990 Atlantic 2.1 Digifant?
Thanks
1990 Atlantic 2.1 SS
1996 Lotus Esprit S4s
1996 Lotus Esprit S4s
-
- Registered user
- Posts: 185
- Joined: 14 Apr 2014, 21:50
- 80-90 Mem No: 13518
Re: Oil pressure warning LED operation.....
Update from today. .
Took the pushrod tube cover off. The pressure switch was a 0.15 to 0.45 bar one. Is it ok to fit a 0.15 to 0.3 one?
Whilst the wire was off I grounded it and turned on the ignition. The led lit for a second and then went out without the engine being turned.
What should I look for now?
Any ideas greatly received
Thanks
Took the pushrod tube cover off. The pressure switch was a 0.15 to 0.45 bar one. Is it ok to fit a 0.15 to 0.3 one?
Whilst the wire was off I grounded it and turned on the ignition. The led lit for a second and then went out without the engine being turned.
What should I look for now?
Any ideas greatly received
Thanks
1990 Atlantic 2.1 SS
1996 Lotus Esprit S4s
1996 Lotus Esprit S4s