Hello all,
The front seats in my van are feeling a little elderly, and trips from London to Devon require a butt-massage on arrival
Does anyone know a good firm to get complete seats from? JK doesnt seem to do seats.
And any tips? Do I replace the seats including runners? And is the base a standard size, or not?
And how easy/expensive is it to get and fit swivelable seats? is it a DIY job?
Any help will be much appreciated by me and my equally sore passenger!
cheers,
matt
Replacing seats
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 124
- Joined: 11 Oct 2005, 12:23
- 80-90 Mem No: 0
- Location: London, or chuggin' along the A303
Replacing seats
One T25 in London, another one in Sydney.
- NOT ANOTHER LEAK
- Registered user
- Posts: 190
- Joined: 24 Oct 2005, 09:05
- 80-90 Mem No: 2272
- Location: preston lancashire club80-90memb2278
if your frames are ok try this place and get them re-upholstered
http://www.vwinteriors.com/
http://www.vwinteriors.com/
richard member no 2278
sorry son no screwballs left
sorry son no screwballs left
- stuckin88
- Registered user
- Posts: 1122
- Joined: 11 Oct 2005, 16:27
- 80-90 Mem No: 134
- Location: North Essex
If you want a swivel base this is separate from the actuall seats so you can fit one to you existing passerger seat anyway--easiest way to get more comfy seats is to get some from a high spec T25 ie Caravelle-if you use seats from another car you will have to weld on your existing runners-
Billy...Defected to white box but still lurking.
- Slackbladder
- Registered user
- Posts: 55
- Joined: 10 Nov 2005, 10:08
- 80-90 Mem No: 1787
- Location: Southport - Member 1787
I fitted a pair of Rover Half leather Seats (loosely based on recaro) about 18 months ago. Any of the 93 - 97 SLi 200/400 series should do you. Mine came out of a 96 200SLi. Mot Failiure. Cost me £25 squid the pair
http://i25.photobucket.com/albums/c78/g ... /seats.jpg
Need to do a bit of bending and drilling, but for comfort...VERY well worth it:-)
http://i25.photobucket.com/albums/c78/g ... /seats.jpg
Need to do a bit of bending and drilling, but for comfort...VERY well worth it:-)