Page 1 of 33
Kevtherevagon
Posted: 14 Oct 2011, 20:33
by Plasticman
Well this seems like a nice van, tis called carol camper(so the logo's say, but it seems to have some troubles, had look in the back and there is a bit of floor/inner arch missing
outside same area
I think the cutting disc is going to get some use ...
windows are sorry
and
front screen area has the usual ventilators
and slipped with the hammer
thers some other bits that are not happy but they will have to wait, enough rot-porn for my phone for one night.
mm
Re: Kevtherevagon
Posted: 14 Oct 2011, 22:48
by jimpainter
Here we go again.
Re: Kevtherevagon
Posted: 14 Oct 2011, 22:50
by Plasticman
you cant keep good rot down can you... back to the yard with you...
mm
Re: Kevtherevagon
Posted: 15 Oct 2011, 06:56
by weldore
blimey !
Re: Kevtherevagon
Posted: 15 Oct 2011, 09:23
by kevtherev
Louise audibly gasped at the sight of this, I have to admit my tummy went over
That wheel arch I suspect was old repair Mike, just goes to show that a bad repair will come back and haunt you if not done right.
Re: Kevtherevagon
Posted: 15 Oct 2011, 09:50
by Mickyfin
Blimey, you have your work cut out. See what I did there
Carol is in good hands though which is great, and will follow your work with her as Im very interested in learning as usual.
Re: Kevtherevagon
Posted: 15 Oct 2011, 12:16
by billybigspud
that looks like a very well used hammer to me.
Re: Kevtherevagon
Posted: 15 Oct 2011, 20:12
by Plasticman
thats the sharper of the picks, t'other gets more use, though must be 30+ yrs old
mm
Re: Kevtherevagon
Posted: 15 Oct 2011, 20:19
by billybigspud
dont tell me,
you've had that hammer 30 yrs, its had 9 new heads and 15 new handles
Re: Kevtherevagon
Posted: 15 Oct 2011, 22:16
by Plasticman
no, the tatty thing will last a lifetime, it a ratty one thats right for nsome works, like welding type stuff, the nice ones for tin bashing wont see this carp until its cleaned up
mm
Re: Kevtherevagon
Posted: 16 Oct 2011, 22:10
by Cruz
Break for spares?
It'll be like new once Mike's wove his magic welder
Re: Kevtherevagon
Posted: 16 Oct 2011, 22:14
by Plasticman
thats a thought, good gas conv. nice engine and upholstery, wheels good but rest is fit for a few, very few body cuts... so bout a grand then
mm
Re: Kevtherevagon
Posted: 16 Oct 2011, 22:34
by HarryMann
Don't do it, Mickey, the outside tin box bit isn't 't that rare... honest
There's better things for your talents, than diligently filling a latticework in
Re: Kevtherevagon
Posted: 17 Oct 2011, 06:51
by kevtherev
Now look here... I might have a say in this!
Re: Kevtherevagon
Posted: 17 Oct 2011, 07:37
by 72BUG
Poor Carol.
Looks like you made the right descision taking her off the road for winter Kev.
It's always scary the nastiness you can find once you start digging.