How to fit rear seatbelts

Post by **sixsprings** » 01 Dec 2005, 22:44

for the book..see here

http://www.amazon.com/gp/product/083760 ... s&v=glance

for the seatbelts, is it a panal van, or one with factory windows?

Post by **ROBS T25** » 02 Dec 2005, 06:54

welcome chad it depends on what belts you want, easiest is lap belts, my 2 boys are 8 & 6 and fit snug in them if you have cupboards to the o/s then you can only fit 1, 3 point belt to the n/s have a look under your rear seat you may already have the mounting points there were it starts to slope down more than likely covered up with a small black grommit. Failing this just kampers do a fixing plate and bolts just have to drill through body work and attach plate from underneath its that easy you can get lap belts from any scrappy or get them from JK good luck mate!!

Post by **Ye Olde Syncrospares** » 02 Dec 2005, 08:56

hi malky,if your syncro is a cravelle or kombi (van with factory windows) then your lucky to have rear seat belt points,if its a double cab then its easy, if its a converted panel van then time to get the drill out and put your own in,dont drill into the fuel tank!!!!!!cj.