My sliding door seems to be sticking out about 10mm the other end to the lock/handle.
Only just noticed it ..can this be adjusted if so how?
Sliding door
Moderators: User administrators, Moderators
Sliding door
Member number 1809.
now a t4' er
John
now a t4' er
John
- Aidan
- Trader
- Posts: 6556
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
early or late ? May 1985 build ish, onwards is late
If late then the rear is the locking end and the pin that th lock latches to can be untightened and moved to adjust, but it may be the lock is worn and isn't going all the way on. Will it close fully if you give it a good slam to at the back ? And does it then spring open a little a few mins later ? Then the lock is worn out.
Early is slightly different, but someone else will know.
If late then the rear is the locking end and the pin that th lock latches to can be untightened and moved to adjust, but it may be the lock is worn and isn't going all the way on. Will it close fully if you give it a good slam to at the back ? And does it then spring open a little a few mins later ? Then the lock is worn out.
Early is slightly different, but someone else will know.