Hi all, I remember reading somewhere that Rover seats will fit in a t25. The ones I'm looking at are from a Rover 200. Anyone know if I'll get them in without too much trouble?
Cheers, Paddy.
Rover seats
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 85
- Joined: 25 Nov 2005, 19:49
- 80-90 Mem No: 2298
- Location: abingdon oxon 2298
rover seats
Hi i put some rover 216 seats in my last t25 they unbolt quite easily from the rover .To put them in the van I had to drill through the runners and the bodywork .On the side nearest the door its easy just bolt through the runners and tighten the nuts from under the wheelarch.To get to the other side under the seat it is a bit more tricky drill through the runners the same but it takes a bit of patience to get the nuts on and tightened.When they were in being that the new runners were on top of the old vw ones it gave you extra height ,unless you are over 6 feet tall you still have plenty of head room.The seats were very comfortable and a lot kinder to your back. good luck ,bluebus.