sliding door cover removal

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

Locked
mbcamper
Posts: 183
Joined: 04 Jan 2014, 10:25
80-90 Mem No: 13121
Location: East Lothian

sliding door cover removal

Post by mbcamper »

I want to remove the panel which covers up the sliding door mechanism; the bit under the rear window...

So far I've removed the screws holding it in place (ended up drilling the heads off the screws), and spent a bit of time trying to encourage it to come off my hitting it with a mallet from the bottom. It's not showing any sign of coming away...

Any top tips for removing this panel? I really want to remove it to I can make sure there isn't a load of rust underneath which needs sorting... I'm on a rust seeking mission if you know what mean!

User avatar
itchyfeet
Posts: 12387
Joined: 23 Jul 2007, 17:24
80-90 Mem No: 12733
Location: South Hampshire

Re: sliding door cover removal

Post by itchyfeet »

Pull it out at the bottom so the fixing lugs are clear of the fixing lugs welded to the body
then give it a sharp push upward with your palm, if it hasnt been off for years you may need a rag to protect the paint, block of wood and a hammer.
1988 DG WBX LPG Tin Top
1989 DJ digijet WBX Holdsworth Villa 3 Pop Top
itchylinks

Plasticman
Trader
Posts: 8078
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: sliding door cover removal

Post by Plasticman »

i would add that when yopu pull it away from the body ,you should bend the tweo fixing lugs down so the the panel is now on top of them , then to help free it, pull cover away from body and back a few times then solid thumps up with heel of your hand,then more in out and so oon
mm

Locked