Club 80-90 Forums

Any tips on fitting these please?
Thanks
G

Measure twicw, cut once.
Otherwise it's straightfoward.

Titus A Duxass wrote:Measure twicw, cut once.
Otherwise it's straightfoward.

Many thanks, is it just a matter of pulling the old one out with a pliers for e.g?
G

your talking of the J scrapers ?
mm

metalmick8y wrote:your talking of the J scrapers ?
mm

I guess so they do look like the letter J, The ones for the front doors.
G

i asked cos titus said about cutting and yes the uppers are cut but not the J's
they lift out from the rear first,so lift the felt upper carefully out the way, then up and out , reverse to fit, ensure they fit under the flap from the 1/4 seal
mm

metalmick8y wrote:i asked cos titus said about cutting and yes the uppers are cut but not the J's
they lift out from the rear first,so lift the felt upper carefully out the way, then up and out , reverse to fit, ensure they fit under the flap from the 1/4 seal
mm

Many thanks
G