Fitting window scrapers

Thin bits of metal and bright blue light.

Moderators: User administrators, Moderators

Locked
gypo
Posts: 304
Joined: 25 Aug 2010, 19:41
80-90 Mem No: 9543
Location: South Wales

Fitting window scrapers

Post by gypo »

Any tips on fitting these please?
Thanks
G
T25 1.9 Petrol 1985 Homebrew

User avatar
Titus A Duxass
Posts: 5745
Joined: 24 Nov 2007, 08:22
80-90 Mem No: 4475
Location: Cologne

Re: Fitting window scrapers

Post by Titus A Duxass »

Measure twicw, cut once.
Otherwise it's straightfoward.
VW T3 GTi Camper 2,0l

gypo
Posts: 304
Joined: 25 Aug 2010, 19:41
80-90 Mem No: 9543
Location: South Wales

Re: Fitting window scrapers

Post by gypo »

Titus A Duxass wrote:Measure twicw, cut once.
Otherwise it's straightfoward.
Many thanks, is it just a matter of pulling the old one out with a pliers for e.g?
G
T25 1.9 Petrol 1985 Homebrew

Plasticman
Trader
Posts: 8088
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: Fitting window scrapers

Post by Plasticman »

your talking of the J scrapers ?
mm

gypo
Posts: 304
Joined: 25 Aug 2010, 19:41
80-90 Mem No: 9543
Location: South Wales

Re: Fitting window scrapers

Post by gypo »

metalmick8y wrote:your talking of the J scrapers ?
mm
I guess so they do look like the letter J, The ones for the front doors.
G
T25 1.9 Petrol 1985 Homebrew

Plasticman
Trader
Posts: 8088
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: Fitting window scrapers

Post by Plasticman »

i asked cos titus said about cutting and yes the uppers are cut but not the J's
they lift out from the rear first,so lift the felt upper carefully out the way, then up and out , reverse to fit, ensure they fit under the flap from the 1/4 seal
mm

gypo
Posts: 304
Joined: 25 Aug 2010, 19:41
80-90 Mem No: 9543
Location: South Wales

Re: Fitting window scrapers

Post by gypo »

metalmick8y wrote:i asked cos titus said about cutting and yes the uppers are cut but not the J's
they lift out from the rear first,so lift the felt upper carefully out the way, then up and out , reverse to fit, ensure they fit under the flap from the 1/4 seal
mm
Many thanks :ok
G
T25 1.9 Petrol 1985 Homebrew

Locked