Morning all,
Can someone please advise if this is worth keeping? Given to me by my Dad and wondered if suitable for body repairs, specifically cab steps. I have a hole!
Included were a box of 2mm and 2.5mm rods.
Thanks
Steve
Arc welder, suitable?
Moderators: User administrators, Moderators
Arc welder, suitable?
Westfalia pop-top 1990 1.6JX
-
- Registered user
- Posts: 66
- Joined: 02 Nov 2013, 19:18
- 80-90 Mem No: 13074
- Location: Essex
- Contact:
Re: Arc welder, suitable?
If you can use it yes.
if you're going to learn how to use it yes
generally they are a bit hot for body work but it is doable
if you're going to learn how to use it yes
generally they are a bit hot for body work but it is doable
1982 2.0 CU Aircooled *home brew* camper
Re: Arc welder, suitable?
I have never welded before so maybe its not suitable if you say its too hot!
Regards
Steve
Regards
Steve
Westfalia pop-top 1990 1.6JX
- Jakemate
- Registered user
- Posts: 141
- Joined: 02 Mar 2014, 01:37
- 80-90 Mem No: 13382
- Location: Coalville, Leicestershire
Re: Arc welder, suitable?
Arc welders can be used but they do run very hot for body panels. If you do want to try put a thick bit of aluminium behind the steel to act as a heat sink , the weld will not stick to the alloy and it will soak up the excess heat.
A mig or tig is a more suitable welder
A mig or tig is a more suitable welder
Vw Vanagon Westfalia Hitop 1.6td always poorley
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: Arc welder, suitable?
Looks like an ALDI one. They're ok for heavy stuff. I used mine to weld new rear spring mounts at the back - did a great job. Easier than the MIG to be honest and no gas needed. No good for body panels though.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
- Oldiebut goodie
- Registered user
- Posts: 7295
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: Arc welder, suitable?
I just use mine for a carbon arc torch for brazing nowadays and also the odd bit of heavy stuff. I had it out for welding up my stainless steel rudder last year.
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: Arc welder, suitable?
Actually, I take it back. 'Parkside' is a LIDL brand.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.