Hi All
I noticed the other day that the back end of my sliding door is a little low and would like to raise it up a little to line up with the rear quarter panel.
Anyone got any tips on how to do this before I take the side of the van off?????
Cheers
Rob
Adjusting sliding door fit
Moderators: User administrators, Moderators
-
rfarey
- Registered user
- Posts: 8
- Joined: 11 Sep 2009, 15:58
- 80-90 Mem No: 10402
- Location: Leamington Spa, Warwickshire
Adjusting sliding door fit
1984 Blue/white Autohomes Camper
Bilbo replacement hightop
1.9 DG Petrol 76PS Caravelle Automatic
Bilbo replacement hightop
1.9 DG Petrol 76PS Caravelle Automatic
-
kevtherev
- Registered user
- Posts: 18830
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: Adjusting sliding door fit
Use the level adjustment bolts.
There are quite a few bolts that hold the door to the brackets..they all have some movement.
before you do anything check that all the bushes and rollers are in good shape
There are quite a few bolts that hold the door to the brackets..they all have some movement.
before you do anything check that all the bushes and rollers are in good shape
AGG 2.0L 8V. (Golf GTi MkIII)
-
Plasticman
- Trader
- Posts: 8047
- Joined: 12 Oct 2005, 20:55
- 80-90 Mem No: 1948
- Location: lincolnshire
Re: Adjusting sliding door fit
picky of front and rear door gap and then detail at centre swage line
mm
mm